Made by a Fabricista: Bias’d for Plaid

Hello everyone! It’s Sharon back with my second Fabricista post! This time I chose to work with a lovely soft pastel plaid shirting fabric.

The big shirt trend has been popular for a season or two and, according to recent fashion articles I’ve read, it will remain popular throughout the summer.

This lightweight fabric, a cotton/polyester blend, had the structure to work beautifully as an oversized shirt. I don’t typically wear classic button front shirts, so of course I choose to sew one with a little “extra”!

Vogue 1744 looks like a tailored button front shirt from the front, but the pleated back provides interest and movement. By the way, this pattern was rebranded in 2020, and had been previously released as Vogue 9360. I sewed View D, the mandarin collar option, with short sleeves and hi-low hem.

This particular plaid is an uneven plaid. If you’re unsure whether your plaid is even or uneven, here’s how to test (according to my Vogue Sewing Book c. 1975). "Fold the fabric diagonally through the center of any repeat, making sure the plaid is perfectly on grain. If spaces and colors match, test further by folding the plaid vertically or horizontally though the center of any repeat. In an even plaid the spaces and colors match in both directions. In an uneven plaid the spaces and colors do not match in both directions.”

Since I was working with a plaid, I cut my pattern pieces face-up on the right side of a single layer of fabric. Because this was an uneven plaid, I used a one-way layout. I was careful to match my stitching lines, not my cutting lines.

I choose to match the plaids horizontally so when the shirt was buttoned the horizontal line would be unbroken.

I cut the pleated back on the bias and added an overlay of lace on the back yoke. The bias doesn’t have to match at the side seams, and lace distracts the eye enough that the plaid doesn't need to be matched at the shoulder or armhole seam. My hair is long enough that the yoke is covered when I wear the shirt, but I pulled my hair forward so you can see the yoke. Both of those are little tricks I use when I don’t want to spend a lot of time matching the plaid on my pattern pieces, ha-ha.

I pre-washed and dried the fabric, as I do with every fabric purchase, and it came out of the dryer perfectly. I love that I won’t need to iron this shirt.

I used a narrow three-thread stitch on my serger to finish all of the seams, and also to finish the bottom edge before turning under and stitching in place.

The beauty of this big shirt is I can pair it with jeans, white pants, or add a cardi and wear it open like a cardigan. It’s the perfect button front shirt for summer!

SHARON | @thesharonsews

Unfortunately Fabric Mart Fabrics sell out quickly!
You can find similar fabrics by shopping the following category SHIRTING.

Made by a Fabricista: A Wardrobe Staple for Spring - A Denim Coat

Hello Sewing Friends! It’s Sharon with Sharon Sews with my latest Fabricista make – a denim coat for spring. Denim is a wardrobe staple for many of us, and even more so this year with denim on denim looks coming back in style. The denim I used is a medium weight cotton/lycra blend with about a 20% stretch selvage to selvage. Fabric Mart always does an amazing job photographing and describing their fabrics, yet I still gasped in delight when I opened the package containing my denim. It was even better than I had anticipated. This fabric would have worked well for a traditional denim jacket – one with button front closure, chest pockets with flaps, and a collar. However, I have wanted to sew this open front coat with kimono inspired sleeves and big patch pockets since February 2021. I saw it in that month’s BurdaStyle Magazine, bookmarked the page, and promptly forgot about the coat. It’s coat #105 if you’re interested in sewing one for yourself. Fortunately, I went on an organ

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month! This year is the year I challenge my sewing skills. I have wanted a moto jacket for some time. Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one. The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting. Remember when I said I wanted to challenge my sewing skills? 😉 This fabric was beautiful but fragile to work with. It was a great mental challenge that had me problem solving before sewing to avoid any potential problems. I first traced out the pattern onto tissue paper to determine the fit. I used scrap cotton fabric to sew up a “practice run” of the jacket. I was pleasantly surprised at how easily the jacket comes together. I sewed up the muslin in one evening. It was time to cut into the beautifu

Made By A Fabricista: My Version of the Infamous DVF Wrap Dress

Just in case you are not aware, the iconic Diane Fustenberg wrap dress has turned 50 this year. In celebration, Vogue has re-released the DVF Wrap Dress pattern, which now comes in extended sizes. This dress is so classic and fits many different body types. I got a hold of this pattern and decided this would be my birthday dress this year. This pattern is categorized as a Very Easy Vogue pattern, and I would have to agree with that. Wrap dresses are usually relatively simple to put together since there aren’t that many pattern pieces to sew together. I made View A in a size 22 and the only modification I made was to shorten the hem by 6 inches. I will say that since I used a Ponte Knit , I could have gone down to a size 20. I didn’t read the fabric suggestions before picking my fabric. I’ve always remembered seeing the DVF Wrap dress in knits. After reviewing the fabric suggestions, they do say that you can use soft fabrics, like a Challis or a Chambray. As I mentioned, I’ve alwa

Fabric Mart Fabricistas

Search This Blog