Made by a Fabricista: Mommy and Me Outfits for Summer

Hi everyone! I'm back with another Fabric Mart Make! In my last post, I shared a wardrobe of coordinating outfits for my two girls. This time, I thought I should do a me-sew - but I couldn't help myself - I whipped up matching outfits for my girls as well!

I was really drawn to this purple and green floral blouse weight rayon crepe, and since I've always wanted to try True/Bias Patterns, I landed on the Roscoe Dress for this project.

What I didn't realize until after I received the pattern, is that Roscoe is drafted for a C cup - I am barely an A cup. My bust fit into their smallest pattern size, and after making a straight muslin of just that size, and feeling completely overwhelmed by fabric, I knew I would have to do some modifications.

The easiest way to make the adjustment is to remove excess fabric from the center front and center back of each pattern piece. I removed 1/2" from both templates (in retrospect, I could have removed an inch). I also shortened the sleeves - I took took 3" off, though I think I could have done about 6". I didn't make adjustments to the sleeve bands. If you are shortening your sleeves, I suggest measuring the part of your arm where you want that sleeve band to sit, as I am finding it a little tight above my elbow. Another fit adjustment I made was with the slit in the center front, which I shortened by 1". Lastly, I lengthened the bodice by 1/2" and used the mini length skirt pieces.

I found Roscoe fairly easy to sew, and the instructions were clear. I felt that the fabric requirements are overly generous, with almost an entire yard leftover from View B.

Since I had so much extra fabric (I had already bought an extra yard to make a blouse for my eldest), I decided to make a dress for my youngest as well. For both girls, I used the Peony Patterns Hyacinth Pattern. This is a cute dress with sailor tie, puff sleeves or sleeveless, has a lined bodice, and a button down front. I made the sleeveless version for my youngest and then made some mods to create a blouse for my eldest!

To create the blouse, I lengthened the pattern by 8 inches (I compared the finished measurements to another shirt pattern in her size), and flared the hemline by about a half inch on each side (in hindsight, an inch or two would have been better). I also didn't want to use a full lining on the blouse, so I created a facing and separate placket instead.

I did find this fabric hard to work with on these smaller scale, more fiddly projects. I'm not super experienced with sewing lightweight shifty fabrics, and found it was hard to keep this fabric on grain. This wasn't such a big deal with the billowy Roscoe, but particularly with the placket and collar pieces of the girls' dresses, I found these ultimately ended up cut off grain so the collar doesn't look too great close up!

Finally, I wanted to make a pair of linen shorts for my eldest. Fabric Mart have such a great selection of linens, and I jumped on some oatmeal mid-weight woven. I had a hard time deciding which pattern to use for this one! I was wavering between two options before looking at my notes from when I first planned out these sews, only to realize I had originally intended to go with a third option: the Limone Lounge Set shorts from Jennuine Design.

Decision made, I whipped up these shorts in the Bermuda length. I really like this pattern - it comes in multiple shorts and pants lengths, and has skirt options too. The waistband has options for a paper bag waist, and drawstring cord in addition to elastic. The big pockets are really cute and a hit with my 9 year old! I did decide to size up with these - I had made them once during testing and while they fit mostly perfectly, they were a little tight in the butt. I *could* have just altered the rise, but laziness kicked in and sizing up just seemed easier. My daughter really loves them though, so that's always a win in my book!

Thanks for reading today! Happy sewing!

NATASHA | @auschicksews

Unfortunately Fabric Mart Fabrics sell out quickly!
You can find similar fabrics by shopping the following categories CREPE & LINEN
You can also shop our selection of True Bias patterns HERE.

Made by a Fabricista: A Wardrobe Staple for Spring - A Denim Coat

Hello Sewing Friends! It’s Sharon with Sharon Sews with my latest Fabricista make – a denim coat for spring. Denim is a wardrobe staple for many of us, and even more so this year with denim on denim looks coming back in style. The denim I used is a medium weight cotton/lycra blend with about a 20% stretch selvage to selvage. Fabric Mart always does an amazing job photographing and describing their fabrics, yet I still gasped in delight when I opened the package containing my denim. It was even better than I had anticipated. This fabric would have worked well for a traditional denim jacket – one with button front closure, chest pockets with flaps, and a collar. However, I have wanted to sew this open front coat with kimono inspired sleeves and big patch pockets since February 2021. I saw it in that month’s BurdaStyle Magazine, bookmarked the page, and promptly forgot about the coat. It’s coat #105 if you’re interested in sewing one for yourself. Fortunately, I went on an organ

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month! This year is the year I challenge my sewing skills. I have wanted a moto jacket for some time. Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one. The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting. Remember when I said I wanted to challenge my sewing skills? 😉 This fabric was beautiful but fragile to work with. It was a great mental challenge that had me problem solving before sewing to avoid any potential problems. I first traced out the pattern onto tissue paper to determine the fit. I used scrap cotton fabric to sew up a “practice run” of the jacket. I was pleasantly surprised at how easily the jacket comes together. I sewed up the muslin in one evening. It was time to cut into the beautifu

Made By A Fabricista: My Version of the Infamous DVF Wrap Dress

Just in case you are not aware, the iconic Diane Fustenberg wrap dress has turned 50 this year. In celebration, Vogue has re-released the DVF Wrap Dress pattern, which now comes in extended sizes. This dress is so classic and fits many different body types. I got a hold of this pattern and decided this would be my birthday dress this year. This pattern is categorized as a Very Easy Vogue pattern, and I would have to agree with that. Wrap dresses are usually relatively simple to put together since there aren’t that many pattern pieces to sew together. I made View A in a size 22 and the only modification I made was to shorten the hem by 6 inches. I will say that since I used a Ponte Knit , I could have gone down to a size 20. I didn’t read the fabric suggestions before picking my fabric. I’ve always remembered seeing the DVF Wrap dress in knits. After reviewing the fabric suggestions, they do say that you can use soft fabrics, like a Challis or a Chambray. As I mentioned, I’ve alwa

Fabric Mart Fabricistas

Search This Blog