Skip to main content

Made By A Fabricista: Ready for Hibernation!

While I absolutely love creating cosplay content for my blog posts (and we will be returning to cosplay for my next post I promise!), I'm currently on the edge of “Cosplay Burnout”. Like any form of burnout, it's leaving me with negligible amount of desire to see, and one of the ways I like to overcome that is with doing an easier project for just me to enjoy, and that's the route I opted with for this project!

When I saw this fur-like wool blend I fell in love with it!

I considered making a labubu hoodie, but changed directions to a cardigan as that's a style I'd wear most often! It's currently in a blank slate state where I'm debating adding rabbit ear, or bear ears, but until I come to a conclusion, it'll just be a warm and fuzzy option now that the temperature is dropping!

For the pattern of this cardigan, I drafted it right on the fabric since the wool blend is a knit, I knew it'd be somewhat forgiving. I had my fabric folded in half for the front and back, then set to marking out a center line and determining how long I wanted it to be. I settled on using around a yard for the length, then used my measurements to map out my shoulders, armscye, collar, and for once remembering the angle of the shoulders, something I commonly forget.

Once I had the main body cut, I mapped out my hood and sleeves onto the fabric giving myself a little extra length for a bit of bagging at the cuff. While I often cut my fitted sleeves on the bias, since I was working with a knit and limited fabric, I went ahead and cut on the straight grain and just gave myself an extra inch in width to make sure I had enough wiggle room since that can be removed from the seam allowance later if need be!

To finish the edges and make the cuff I used a spandex rib knit (funnily enough labeled “Teddy Bear Brown”) cut into six inch strips sewn together and sewn on the edges. I started with the bottom hem, which went smoothly, but the stretch worked against me around the front edge and caused some twisting that will get fixed at a later time when I'm less burnt out. And the cuffs turned out exactly as I hoped, the spandex allowed me to get that little bit of poof without needing elastic and it's so soft that overall I'm very happy with my fabric choices!

While I am allergic to sheep, I'm not allergic to wool, and working with a knit allowed this garment to go unlined. While it does have a small amount of “itch” to me, it's not enough to actually bother me, and I will absolutely be reaching for this cardigan all winter!

MINA  | @cosplaytology 

Comments

  1. This is so cool and very attainable for beginners even!

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Recent Posts You Might Like

Return to work wardrobe in ITY – which is your favorite?

In June of this year, after spending nearly 11 years at my place of employment and after restructuring and cost cutting, I took a separation package. I was so fortunate to be able to take a few months off, and also to very quickly find a position with a new company. I start my new job on September 14th and I’m super excited!  This new position is also different for me in that it is local to my area (whereas before I worked remotely and traveled to the office every few weeks) – so I’ll be going into the office three times a week. So of course I needed to sew up some new outfits! I’m a huge fan of ITY knit fabric ; ITY stands for interlock twist yarn, which describes the way the yarn is knitted together. I love it for tops, dresses, skirts, and even pants: it’s comfortable, easy care, low wrinkle, and comes in so many beautiful prints. I sewed up three new outfits over the last two weeks and I’m excited to share them with you today! Oh, and also – I need help choosing what to wear fi...

Sometimes The Fabric Chooses The Pattern

Have you ever fallen in love with a fabric and immediately envisioned exactly what you wanted to make, only to realize halfway through the planning process that the fabric had other ideas? That’s exactly what happened with this project. I used Fabric Mart’s Black/Dark Cobalt/Smoky White Poly Foliage Print Chiffon , and while I initially had plans for a detailed dress, the fabric ultimately led me in a completely different direction—and I’m so glad it did. When I first saw this gorgeous chiffon print, I was immediately drawn to the rich color palette and beautiful movement. The dark background paired with the cobalt and smoky white foliage creates a striking look that feels both dramatic and versatile. My original plan was to make a dress with princess seams, buttons, and more structured design elements. However, after spending time with the fabric, I realized that all of those seam lines and construction details would compete with what makes this chiffon so beautiful: its drape, moveme...

Hillhouse Nap Dress Dupe with Fabric Mart Fabric!

I have been wanting a Hill House Home Nap Dress for the longest time, but when I saw the reviews that the fabric was too sheer and the price tag—often well over $200—I decided it would be much more fun to make my own! I found this gorgeous abstract navy and white cotton voile from Fabric Mart and knew it would be perfect for the light, floaty dupe I had in mind. Cotton voile is soft, lightweight, and beautifully suited for a shirred dress like the infamous Nap dress. This abstract print gives the finished dress a more modern feel. I love a floral fabric, but I was excited to find this abstract print in my favorite color of navy.  Rather than using an entire dress pattern, I followed Just Lauren Johnson’s YouTube tutorial on how to create a Nap Dress from rectangles. Lauren walks you through how to use your own measurements to calculate the dimensions of the bodice, skirt tiers, and other pieces. I loved this approach because I could create the dress specifically for my measurement...

Foray into Shirtmaking

I love playing with volume and texture! I've always loved well-made shirts: the soft yet crisp fabric, the structure and tailored fit. I love the deceptive simplicity that tries to conceal the precision and details that go into their construction…everything about well-made shirts is fascinating. And despite my interest, I somehow never really owned one. Let’s change that! I took my time with the finishing touches. I decided to bury my nose in a couple of David Page Coffin books on shirtmaking and became even more determined to try my hand at sewing one for myself. Everything I read about shirtmaking emphasized the need for really good fabric, so this 100% cotton shirting was a no-brainer (SKU: DMC 5116). I mean, look at those stripes! It's incredibly soft and light, with lots of body and a voluminous drape. It holds its shape remarkably well, and it was a delight to press. For my first go, I wanted a forgiving pattern that could hide any potential mistakes behind gathers and v...