DIY Tutorial: Little Wallet

A wallet was given to me for Christmas this past year and it has gotten some heavy use. Thus an idea began to blossom. Perhaps I could make another?
It would make a wonderful gift for others as well, so I had to give it a go.

So I waited for a rainy day and the patterning began! After about 20 minutes I had a new wallet.
It was so simple I had to share it with you. Enjoy!

Step 1: Find fabric and cut out pattern. Cut one of each pattern piece in the lining and outer fabric.

The nice thing about this wallet is that it is easy to create a pattern specific to your needs. You can make this bigger or smaller as you please.

Here are the dimensions I used.

Pocket size

Smallest: 2 and 3/4 inches x 5 and 1/2 inches

Middle: 3 and 1/4 inches x 5 and 1/2 inches

Biggest: 3 and 3/4 inches x 5 and 1/2 inches

*all of these measurements include a 1/4 inch seam allowance for the top of the pocket*

Back

6 3/4 inches tall

4 3/4 inches wide at the narrowest point

Step 2: Making the pockets. With right sides together, sew the straight edge (shown here at the bottom of the photo) at a 1/4 inch seam.

Sew each of the 3 pockets in the same fashion.

Step 3: Press.

At this point you should have 3 pockets and the two pieces that will make the back of the wallet.

Step 4: Stack the pockets. Smallest on the top and the largest on bottom.

Step 5: Place the pockets, right sides together, on the outside pattern piece.

Step 6: Place the lining piece on top (right side face down).

Step 7: Pin. Make sure you leave the space between the double pins open (so that you can flip the wallet right side out).

Step 8: Sew.

Step 9: Trim seam allowance.

Step 10: Turn inside out.

Ah, that's better.

And now the big finish! Stitch the hole closed. A nice slip stitch will do nicely.

There now, a finished wallet. What a pleasant thing!

Another color? Sure! This wallet was made from one of the lambskin hides (previously available on our website.) Being such a soft supple leather, I added a button to the front to help hold the flap down. I also neglected to put in a lining (which called for a few pattern alterations), though now I think the leather could have benefited from a little stiffness provided in the lining. Still, it's an adorable wallet and I consider it a success.

I hope you are inspired! Run off and experiment! It is often the most important part of the process.

Marah

Made by a Fabricista: A Wardrobe Staple for Spring - A Denim Coat

Hello Sewing Friends! It’s Sharon with Sharon Sews with my latest Fabricista make – a denim coat for spring. Denim is a wardrobe staple for many of us, and even more so this year with denim on denim looks coming back in style. The denim I used is a medium weight cotton/lycra blend with about a 20% stretch selvage to selvage. Fabric Mart always does an amazing job photographing and describing their fabrics, yet I still gasped in delight when I opened the package containing my denim. It was even better than I had anticipated. This fabric would have worked well for a traditional denim jacket – one with button front closure, chest pockets with flaps, and a collar. However, I have wanted to sew this open front coat with kimono inspired sleeves and big patch pockets since February 2021. I saw it in that month’s BurdaStyle Magazine, bookmarked the page, and promptly forgot about the coat. It’s coat #105 if you’re interested in sewing one for yourself. Fortunately, I went on an organ

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month! This year is the year I challenge my sewing skills. I have wanted a moto jacket for some time. Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one. The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting. Remember when I said I wanted to challenge my sewing skills? 😉 This fabric was beautiful but fragile to work with. It was a great mental challenge that had me problem solving before sewing to avoid any potential problems. I first traced out the pattern onto tissue paper to determine the fit. I used scrap cotton fabric to sew up a “practice run” of the jacket. I was pleasantly surprised at how easily the jacket comes together. I sewed up the muslin in one evening. It was time to cut into the beautifu

Made By A Fabricista: My Version of the Infamous DVF Wrap Dress

Just in case you are not aware, the iconic Diane Fustenberg wrap dress has turned 50 this year. In celebration, Vogue has re-released the DVF Wrap Dress pattern, which now comes in extended sizes. This dress is so classic and fits many different body types. I got a hold of this pattern and decided this would be my birthday dress this year. This pattern is categorized as a Very Easy Vogue pattern, and I would have to agree with that. Wrap dresses are usually relatively simple to put together since there aren’t that many pattern pieces to sew together. I made View A in a size 22 and the only modification I made was to shorten the hem by 6 inches. I will say that since I used a Ponte Knit , I could have gone down to a size 20. I didn’t read the fabric suggestions before picking my fabric. I’ve always remembered seeing the DVF Wrap dress in knits. After reviewing the fabric suggestions, they do say that you can use soft fabrics, like a Challis or a Chambray. As I mentioned, I’ve alwa

Fabric Mart Fabricistas

Search This Blog