DIY Tutorial: Little Wallet

A wallet was given to me for Christmas this past year and it has gotten some heavy use. Thus an idea began to blossom. Perhaps I could make another?
It would make a wonderful gift for others as well, so I had to give it a go.

So I waited for a rainy day and the patterning began! After about 20 minutes I had a new wallet.
It was so simple I had to share it with you. Enjoy!

Step 1: Find fabric and cut out pattern. Cut one of each pattern piece in the lining and outer fabric.

The nice thing about this wallet is that it is easy to create a pattern specific to your needs. You can make this bigger or smaller as you please.

Here are the dimensions I used.

Pocket size

Smallest: 2 and 3/4 inches x 5 and 1/2 inches

Middle: 3 and 1/4 inches x 5 and 1/2 inches

Biggest: 3 and 3/4 inches x 5 and 1/2 inches

*all of these measurements include a 1/4 inch seam allowance for the top of the pocket*

Back

6 3/4 inches tall

4 3/4 inches wide at the narrowest point

Step 2: Making the pockets. With right sides together, sew the straight edge (shown here at the bottom of the photo) at a 1/4 inch seam.

Sew each of the 3 pockets in the same fashion.

Step 3: Press.

At this point you should have 3 pockets and the two pieces that will make the back of the wallet.

Step 4: Stack the pockets. Smallest on the top and the largest on bottom.

Step 5: Place the pockets, right sides together, on the outside pattern piece.

Step 6: Place the lining piece on top (right side face down).

Step 7: Pin. Make sure you leave the space between the double pins open (so that you can flip the wallet right side out).

Step 8: Sew.

Step 9: Trim seam allowance.

Step 10: Turn inside out.

Ah, that's better.

And now the big finish! Stitch the hole closed. A nice slip stitch will do nicely.

There now, a finished wallet. What a pleasant thing!

Another color? Sure! This wallet was made from one of the lambskin hides (previously available on our website.) Being such a soft supple leather, I added a button to the front to help hold the flap down. I also neglected to put in a lining (which called for a few pattern alterations), though now I think the leather could have benefited from a little stiffness provided in the lining. Still, it's an adorable wallet and I consider it a success.

I hope you are inspired! Run off and experiment! It is often the most important part of the process.

Marah

Made By A Fabricista: A Wooly Wearable Blanket.

Twirling in a me-made outfit! I live in a small town where the nearest fabric shop is a road trip away, so I almost exclusively shop for fabric online. Having access to an online shop like Fabric Mart with a solid search engine is incredibly helpful. But by far my favorite aspect of Fabric Mart is what I call the “Drape Picture” included in each listing! This picture gives me all the information I need and I find it more helpful than the exact weight per yard/square meter. Seeing how the fabric falls close or away from the body gives me a clear idea of how it will behave and inspires me to make it into something that will highlight the fabric’s nature. When I saw the drape of this “Baked Plum” wool suiting , I immediately wanted to immortalize those beautiful folds into a skirt! I opted for a simple self-drafted pleated skirt with a deep hem. I wear my dresses year-round and rely on wool skirts that I layer under or over my dresses for warmth. I cut two panels for the front ...

Made By A Fabricista: Which comes first – the fabric or the pattern?

Ah, the age old question garment sewers are often asked – do you choose the pattern first and then look for fabric, or do you buy fabric and then later decide what it will be when it grows up? If you are a sewist with a large fabric stash (like myself), then perhaps you are on Team Fabric. I would say I definitely lean that way, but there are also times when I land somewhere in the middle – I see a fabric and I think, I’ve just seen a pattern and these two would be perfect together! And that’s how gorgeous dusty rose stretch velvet and a recently released cardigan pattern came together to create the newest addition to my wardrobe. And had me improvising a few things along the way. First. I have to admit - I have a stretch velvet problem. I see it pop up on the website and I almost always grab it, especially if I see a sale. It’s not the easiest fabric to sew (it’s slippery as heck!), but I love it so much and I especially love using it in non-traditional ways. In my last blog post, I...

Made By A Fabricista: Back In The Saddle

If you don’t know in October my beloved Bernina sewing machine blew a fuse and started smoking while I was using it. She went to the shop for repairs, and then I moved. So it’s been a bit since I’ve sewed last and I’ve had trouble getting back into it. I knew I needed a simpler project to get me going again. Julie sewed up a Jarrah sweater recently ( restock coming soon! ) and gushed about how simple and rewarding a project it was. Then we got in this beautiful wool/cashmere sweater knit from England. I was seeing lighthouse keeper, sheep herder in the highlands. I knew it had to be my Jarrah sweater. I did lengthen the bodice by 3 inches. I actually sewed up a mock up with the curved hemline, but decided that wasn’t for me and went with the straight hem. Of course I took zero photos of said mock up. Oops. Otherwise I sewed it up in a size 6 as is. Using the serger this really does sew up quickly. The dropped shoulder creates clean, simple lines that make it easy to sew u...

Fabric Mart Fabricistas

Search This Blog