Skip to main content

DIY Tutorial: Little Wallet

A wallet was given to me for Christmas this past year and it has gotten some heavy use. Thus an idea began to blossom. Perhaps I could make another?
It would make a wonderful gift for others as well, so I had to give it a go.
So I waited for a rainy day and the patterning began! After about 20 minutes I had a new wallet.
It was so simple I had to share it with you. Enjoy!

Step 1: Find fabric and cut out pattern. Cut one of each pattern piece in the lining and outer fabric.
The nice thing about this wallet is that it is easy to create a pattern specific to your needs. You can make this bigger or smaller as you please.
Here are the dimensions I used.

Pocket size
Smallest: 2 and 3/4 inches x 5 and 1/2 inches
Middle: 3 and 1/4 inches x 5 and 1/2 inches
Biggest: 3 and 3/4 inches x 5 and 1/2 inches
*all of these measurements include a 1/4 inch seam allowance for the top of the pocket*

Back
6 3/4 inches tall 
4 3/4 inches wide at the narrowest point
Step 2: Making the pockets. With right sides together, sew the straight edge (shown here at the bottom of the photo) at a 1/4 inch seam.
Sew each of the 3 pockets in the same fashion.
Step 3: Press.
At this point you should have 3 pockets and the two pieces that will make the back of the wallet.
Step 4: Stack the pockets. Smallest on the top and the largest on bottom.
Step 5: Place the pockets, right sides together, on the outside pattern piece.
Step 6: Place the lining piece on top (right side face down).
Step 7: Pin. Make sure you leave the space between the double pins open (so that you can flip the wallet right side out).
Step 8: Sew.
Step 9: Trim seam allowance.
Step 10: Turn inside out.
Ah, that's better.
And now the big finish! Stitch the hole closed. A nice slip stitch will do nicely.
There now, a finished wallet. What a pleasant thing!

Another color? Sure! This wallet was made from one of the lambskin hides (previously available on our website.) Being such a soft supple leather, I added a button to the front to help hold the flap down. I also neglected to put in a lining (which called for a few pattern alterations), though now I think the leather could have benefited from a little stiffness provided in the lining. Still, it's an adorable wallet and I consider it a success.

I hope you are inspired! Run off and experiment! It is often the most important part of the process.
Marah

Comments

  1. I have a bunch of scraps of silk shantung in different colors that I think would look great for this. Thanks!

    ReplyDelete
  2. Thanks for the great idea! A Cheap Wallets was given to me for Christmas this past year and it has gotten some heavy use. Thus an idea began to blossom.

    ReplyDelete
  3. Wow- this is an easy quick project. Thanks for sharing.

    ReplyDelete
  4. hello,I Mary exscuse me possible have a pattern this clutch?Escuse me my orrible english ,hello
    mary-enrico@libero.it

    ReplyDelete
    Replies
    1. Hi Mary, I'm sorry, we do not have a pattern for this wallet.

      Delete
  5. My brother is an artist. He creates designer wallets which are so beautiful. He also creates handbags that really suits with Pakistani dresses on women.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Recent Posts You Might Like

Made By A Fabricista: A Fresh Take on a Classic Shirt Dress

Summer has arrived! That means longer days, soaring temps, and the perfect excuse for me to add another linen garment to my wardrobe.  Lightweight linen and summer weather just go together, don’t you agree? That’s why I choose this striped linen for my next Fabricista make. Hello Sewing Friends! It’s Sharon from Sharon Sews ready to share my summer dress with you.  The tiny blue and white stripes combined with navy buttons give it a bit of coastal charm, while the details make it anything but a traditional shirt dress.  The fabric is a Ralph Lauren 100% shirt weight linen. The stripes are so small that from a distance the fabric almost looks like a solid color. One advantage of those small stripes is that I didn’t worry about whether they matched as I would have with a wider stripe :-)  The pattern I choose is McCall’s 8556, a shirtdress that, instead of a typical straight silhouette, has a gathered bodice, a fitted waistband that sits just above the waist, short, c...

Made by a Fabricista: What to Make with Silk Taffeta

You may have noticed that Fabric Mart has a *HUGE* selection of silk taffeta right now.  A lot of it is either large plaid or large stripes.   I was curious about it, and not really sure what I could make with it, but I just knew it would be gorgeous fabric and had to play around with it.  Turns out, it's actually great for quite a range of projects!  The dress above is my third project. Let me show you the first two. My first was to make some queen size pillow shams.  They are the plaid ones in the back of the photo.  I also made the two printed ones in the center from another Fabric Mart home dec fabric special!  I wanted to make the covers removable with a zipper, and include a braided trim.  As luck would have it, I found a whole card of braided trim at an estate sale that worked with my taffeta for just $2! To start, I used a zipper foot to stitch down the braided trim all around one side of the pillow. Then I serged ...

Made By A Fabricista: Mechanic Chic!

When it comes to buying ready-to-wear garments as a sewist, I only ever spend in three categories: heavy duty winter jackets (life in Maine!), bras… and jumpsuits! I love a good jumpsuit, but unfortunately the ones I used to buy have been impacted by the tariff situation and I can’t get them affordably anymore. This can only mean one thing, folks: it’s time to roll up my sleeves and sew my very first jumpsuit!  When I started planning for this project, I knew I wanted to use a heavyweight linen for cozy comfort in the fall and breathability in the summer. I wanted something that would wear beautifully and soften with age, and something with neutral tones that could go with everything. Naturally, when I came across this 100% linen canvas on Fabric Mart, my heart skipped a beat! I love the ikat-inspired geometry and something about it reminds me of leopard spots too. Bold yet wearable! I am pretty sure this fabric was intended for home decor which I don’t mind at all and in fact of...

Made By A Fabricista: Tried and true summer basics that fit.

Happy Summer Friends! As I am writing this, we are headed into a nasty heat wave…so the timing could not be better to share two of my favorite summer patterns and fabrics.  But first, let me tell you about the fail I had heading into this month’s blog… As Fabricista’s, we get to pick out fabric for each of our blog submissions. I fell in love with this gorgeous lilac jacquard knit that I thought would be perfect for a pop of color in my summer wardrobe. But I made a fatal error - I grabbed a pattern I haven’t made for years, quickly went up one size to account for a few new pounds, and sewed them up. And they don’t fit, will NEVER fit, and will never be worn. Sigh…when will I learn?? Here’s a flat lay pic so we can at least look at the lovely fabric: The lesson I learned (relearned!) is that just like with off the rack clothes, the things that worked well for me years ago don’t work well for me today.  And that’s the case with both tops and bottoms. So I went back to two patt...