Skip to main content

Made By A Fabricista: A Velveteen Blazer


It's blazer season, people!  My pattern is Burda 8/2015 #106A.  Of course I had to choose black velveteen from Fabric Mart, it's a magnet for every bit of cat fur and lint to float through my house. But what did surprise me was how lovely it was to pre-wash. Because it's 100% cotton it washed and tumbled dry beautifully. 


Then I went and chose a faux leather for the shoulder and pocket details... which was a fine enough material but it's actually a stretchy knit that ended up being a bit of a pain in the butt after it was sewn up. Let's look inside to see what's going on in there.


I used a sew-in hair canvas for the front lapel/back neck for some structure... but oh my goodness, I did not pad stitch it! Yes, this was a conscious choice because I did not want a very stiff look, just a softly-firm structure, if that makes sense?! I used an iron-on weft insertion for all of my other pattern pieces to give the fabric a bit more umph-- but opted not to used it in the sleeves. I made sleeve heads from the hair canvas. The shoulder details have the same weft interfacing adhered to it, but I added a layer of the velveteen because it needed to be hefted up. The faux leather is super thin. But I confess this detail ended up less the perfect-- in hindsight I needed a beefier material there that wasn't a slippery mess that rumples up just by looking at it.  But alas!! Sewing is an adventure and not everything we sew is picture perfect every single time, amiright!?! 


What do I really like about this in the end? The puffy sleeves are super cute, they are nicely supported between the lining and the sleeveheads, keeping them fluffed up and full. The sleeves are two pieces, allowing for a really nice fit. I made up a muslin (which I forgot to photograph, of course) in my standard Burda size 42 grading at the hip to about a 46. I also added 1" length to the sleeves and bodice, both normal alterations for me. The only change to the pattern was added about a 1/2" extra total to the front lower bodice to fit my figure better.


Okay, so my very favorite part is the lining.  It's a super hot red poly satin from Fabric Mart.  It has more substance than a charmeuse would and feels really nice. I had the buttons in my stash, given to me a few years back.


Although this blazer isn't as perfect as planned, I'll still wear.  I flipped it inside out to take pics of the lining, and my son said to put it on... and he liked it that way instead. He's got good taste.



Happy Blazer Sewing!
~Kathy
Kathy Sews

Comments

  1. Its beautiful Kathy and so very inspiring! I love sewing jackets but I have yet to adventure into sew in hair canvas! Thanks for sharing!

    ReplyDelete
  2. I looks like it turned out really nice. I have been working on a jacket/coat (Simplicity 1732) and was wondering if you could point me in the direction of some good tutorials on lining / interfacing for this type of garment. I really don't like the pattern direction for this project. Thank you for sharing.

    ReplyDelete
    Replies
    1. Thanks!! My go-to resources for sewing jackets are Tailoring (from the Singer Sewing Reference Series) as well as Tailoring: The Classic Guide to Sewing a Jacket. Both easily available online.

      Delete
  3. I've been wanting a velveteen blazer for years-- I saw one on the cover of Ottobre once and fully intend to make it one day! Until then, I shall covet yours with its spicy lining. And hair canvas! I need to remember that, for sure. Snazzy!

    ReplyDelete
  4. Your blazer is a very creative item and I do like the idea of using faux leather in clothing. It can be a surprise, good and/or bad when using these new vinyls. I love the red lining. This looks really good and I like that you didn't stick to the "good old rules"...good for you. You may want to rethink the jeans...a little snug. I think this jacket would look perfect with a pair of slacks, yes, old fashioned, but traditional is always a winner.

    ReplyDelete
    Replies
    1. Well, uhm... thanks? Glad your taste on RTW jeans on a someone else's figure was clearly stated on a blog about sewing a blazer, anonymous person- so helpful on so many levels.

      Delete
    2. I had some trouble identifying myself with my last reply. I remarked on your jacket and that maybe you would want to rethink the tightness of the jeans. When one looks at you, it's the tight jeans that are noticed first and the jacket, which should be the focal point, is secondary. When you post your handmade items publicly you have to expect a bit of criticism, after all, that is how we learn. BTW, I have been sewing since 1966 and I do know what is a traditional look and that never goes out of style. barbnicoll@gmail.com

      Delete
  5. Kathy, what a wonderful job you did. It really is quite stunning. I love that style, and think I will have to attempt a similar jacket (or that one) some day!

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Recent Posts You Might Like

Made by a Fabricista: What to Make with Silk Taffeta

You may have noticed that Fabric Mart has a *HUGE* selection of silk taffeta right now.  A lot of it is either large plaid or large stripes.   I was curious about it, and not really sure what I could make with it, but I just knew it would be gorgeous fabric and had to play around with it.  Turns out, it's actually great for quite a range of projects!  The dress above is my third project. Let me show you the first two. My first was to make some queen size pillow shams.  They are the plaid ones in the back of the photo.  I also made the two printed ones in the center from another Fabric Mart home dec fabric special!  I wanted to make the covers removable with a zipper, and include a braided trim.  As luck would have it, I found a whole card of braided trim at an estate sale that worked with my taffeta for just $2! To start, I used a zipper foot to stitch down the braided trim all around one side of the pillow. Then I serged ...

Made By A Fabricista: Mechanic Chic!

When it comes to buying ready-to-wear garments as a sewist, I only ever spend in three categories: heavy duty winter jackets (life in Maine!), bras… and jumpsuits! I love a good jumpsuit, but unfortunately the ones I used to buy have been impacted by the tariff situation and I can’t get them affordably anymore. This can only mean one thing, folks: it’s time to roll up my sleeves and sew my very first jumpsuit!  When I started planning for this project, I knew I wanted to use a heavyweight linen for cozy comfort in the fall and breathability in the summer. I wanted something that would wear beautifully and soften with age, and something with neutral tones that could go with everything. Naturally, when I came across this 100% linen canvas on Fabric Mart, my heart skipped a beat! I love the ikat-inspired geometry and something about it reminds me of leopard spots too. Bold yet wearable! I am pretty sure this fabric was intended for home decor which I don’t mind at all and in fact of...

Made By A Fabricista: Tried and true summer basics that fit.

Happy Summer Friends! As I am writing this, we are headed into a nasty heat wave…so the timing could not be better to share two of my favorite summer patterns and fabrics.  But first, let me tell you about the fail I had heading into this month’s blog… As Fabricista’s, we get to pick out fabric for each of our blog submissions. I fell in love with this gorgeous lilac jacquard knit that I thought would be perfect for a pop of color in my summer wardrobe. But I made a fatal error - I grabbed a pattern I haven’t made for years, quickly went up one size to account for a few new pounds, and sewed them up. And they don’t fit, will NEVER fit, and will never be worn. Sigh…when will I learn?? Here’s a flat lay pic so we can at least look at the lovely fabric: The lesson I learned (relearned!) is that just like with off the rack clothes, the things that worked well for me years ago don’t work well for me today.  And that’s the case with both tops and bottoms. So I went back to two patt...

Made By A Fabricista: Burnside Bibs

Hi everyone, this is Byrd with my latest Fabricista make! If you’re looking for the perfect handmade piece for spring and summer travel, these just might be it. This time around I’m sewing up the Burnside Bibs by Sew House Seven using Fabric Mart’s gorgeous Aquamarine/Umber Brown 100% Cotton Floral Artisan Batiks Jungle Dreams by Robert Kaufman. From the moment I saw this fabric, I was completely drawn in by the colors. The combination of aquamarine, brown, and cream feels both earthy and vibrant, making it perfect for warm weather sewing. I immediately knew it would make an incredible spring or summer garment. I’m a longtime fan of Robert Kaufman fabrics and always appreciate the quality and artistry behind the prints. As always, and especially because this is 100% cotton, I gave the fabric a thorough wash and dry before cutting into it. Trust me, I’ve learned the hard way over the years that addressing potential shrinkage before sewing is always worth the extra time. This blouse is...