Skip to main content

Made By A Fabricista: A Velveteen Blazer


It's blazer season, people!  My pattern is Burda 8/2015 #106A.  Of course I had to choose black velveteen from Fabric Mart, it's a magnet for every bit of cat fur and lint to float through my house. But what did surprise me was how lovely it was to pre-wash. Because it's 100% cotton it washed and tumbled dry beautifully. 


Then I went and chose a faux leather for the shoulder and pocket details... which was a fine enough material but it's actually a stretchy knit that ended up being a bit of a pain in the butt after it was sewn up. Let's look inside to see what's going on in there.


I used a sew-in hair canvas for the front lapel/back neck for some structure... but oh my goodness, I did not pad stitch it! Yes, this was a conscious choice because I did not want a very stiff look, just a softly-firm structure, if that makes sense?! I used an iron-on weft insertion for all of my other pattern pieces to give the fabric a bit more umph-- but opted not to used it in the sleeves. I made sleeve heads from the hair canvas. The shoulder details have the same weft interfacing adhered to it, but I added a layer of the velveteen because it needed to be hefted up. The faux leather is super thin. But I confess this detail ended up less the perfect-- in hindsight I needed a beefier material there that wasn't a slippery mess that rumples up just by looking at it.  But alas!! Sewing is an adventure and not everything we sew is picture perfect every single time, amiright!?! 


What do I really like about this in the end? The puffy sleeves are super cute, they are nicely supported between the lining and the sleeveheads, keeping them fluffed up and full. The sleeves are two pieces, allowing for a really nice fit. I made up a muslin (which I forgot to photograph, of course) in my standard Burda size 42 grading at the hip to about a 46. I also added 1" length to the sleeves and bodice, both normal alterations for me. The only change to the pattern was added about a 1/2" extra total to the front lower bodice to fit my figure better.


Okay, so my very favorite part is the lining.  It's a super hot red poly satin from Fabric Mart.  It has more substance than a charmeuse would and feels really nice. I had the buttons in my stash, given to me a few years back.


Although this blazer isn't as perfect as planned, I'll still wear.  I flipped it inside out to take pics of the lining, and my son said to put it on... and he liked it that way instead. He's got good taste.



Happy Blazer Sewing!
~Kathy
Kathy Sews

Comments

  1. Its beautiful Kathy and so very inspiring! I love sewing jackets but I have yet to adventure into sew in hair canvas! Thanks for sharing!

    ReplyDelete
  2. I looks like it turned out really nice. I have been working on a jacket/coat (Simplicity 1732) and was wondering if you could point me in the direction of some good tutorials on lining / interfacing for this type of garment. I really don't like the pattern direction for this project. Thank you for sharing.

    ReplyDelete
    Replies
    1. Thanks!! My go-to resources for sewing jackets are Tailoring (from the Singer Sewing Reference Series) as well as Tailoring: The Classic Guide to Sewing a Jacket. Both easily available online.

      Delete
  3. I've been wanting a velveteen blazer for years-- I saw one on the cover of Ottobre once and fully intend to make it one day! Until then, I shall covet yours with its spicy lining. And hair canvas! I need to remember that, for sure. Snazzy!

    ReplyDelete
  4. Your blazer is a very creative item and I do like the idea of using faux leather in clothing. It can be a surprise, good and/or bad when using these new vinyls. I love the red lining. This looks really good and I like that you didn't stick to the "good old rules"...good for you. You may want to rethink the jeans...a little snug. I think this jacket would look perfect with a pair of slacks, yes, old fashioned, but traditional is always a winner.

    ReplyDelete
    Replies
    1. Well, uhm... thanks? Glad your taste on RTW jeans on a someone else's figure was clearly stated on a blog about sewing a blazer, anonymous person- so helpful on so many levels.

      Delete
    2. I had some trouble identifying myself with my last reply. I remarked on your jacket and that maybe you would want to rethink the tightness of the jeans. When one looks at you, it's the tight jeans that are noticed first and the jacket, which should be the focal point, is secondary. When you post your handmade items publicly you have to expect a bit of criticism, after all, that is how we learn. BTW, I have been sewing since 1966 and I do know what is a traditional look and that never goes out of style. barbnicoll@gmail.com

      Delete
  5. Kathy, what a wonderful job you did. It really is quite stunning. I love that style, and think I will have to attempt a similar jacket (or that one) some day!

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Recent Posts You Might Like

Return to work wardrobe in ITY – which is your favorite?

In June of this year, after spending nearly 11 years at my place of employment and after restructuring and cost cutting, I took a separation package. I was so fortunate to be able to take a few months off, and also to very quickly find a position with a new company. I start my new job on September 14th and I’m super excited!  This new position is also different for me in that it is local to my area (whereas before I worked remotely and traveled to the office every few weeks) – so I’ll be going into the office three times a week. So of course I needed to sew up some new outfits! I’m a huge fan of ITY knit fabric ; ITY stands for interlock twist yarn, which describes the way the yarn is knitted together. I love it for tops, dresses, skirts, and even pants: it’s comfortable, easy care, low wrinkle, and comes in so many beautiful prints. I sewed up three new outfits over the last two weeks and I’m excited to share them with you today! Oh, and also – I need help choosing what to wear fi...

Foray into Shirtmaking

I love playing with volume and texture! I've always loved well-made shirts: the soft yet crisp fabric, the structure and tailored fit. I love the deceptive simplicity that tries to conceal the precision and details that go into their construction…everything about well-made shirts is fascinating. And despite my interest, I somehow never really owned one. Let’s change that! I took my time with the finishing touches. I decided to bury my nose in a couple of David Page Coffin books on shirtmaking and became even more determined to try my hand at sewing one for myself. Everything I read about shirtmaking emphasized the need for really good fabric, so this 100% cotton shirting was a no-brainer (SKU: DMC 5116). I mean, look at those stripes! It's incredibly soft and light, with lots of body and a voluminous drape. It holds its shape remarkably well, and it was a delight to press. For my first go, I wanted a forgiving pattern that could hide any potential mistakes behind gathers and v...

Office Attire to Remember

Hello everyone! I’m very excited to contribute to Fabricista blog once more! I made another brand new cosplay: Reiko Kujirai from Kowloon Generic Romance! Kowloon Generic Romance is a sci-fi, romance & mystery manga series. It was later adapted to a TV anime and live action film! This series takes place in Kowloon Walled City. It’s about a woman named Reiko Kujirai who suffers from memory loss and doesn't remember her past. She works at a realty estate management company with her co-worker Hajime Kudou, a very easy going and brash man who’s also her crush! Reiko lives her life in Kowloon, while also trying to discover who she is, and the mysteries of this city (I will not spoil everything! You’re going to have to check it out for yourself!). I binged the anime in one day and really enjoyed it. The story and the characters are very intriguing. I love that the main characters are in their 30s, which is very rare in anime! After watching the anime, I knew that I had to cosplay Rei...

Sometimes The Fabric Chooses The Pattern

Have you ever fallen in love with a fabric and immediately envisioned exactly what you wanted to make, only to realize halfway through the planning process that the fabric had other ideas? That’s exactly what happened with this project. I used Fabric Mart’s Black/Dark Cobalt/Smoky White Poly Foliage Print Chiffon , and while I initially had plans for a detailed dress, the fabric ultimately led me in a completely different direction—and I’m so glad it did. When I first saw this gorgeous chiffon print, I was immediately drawn to the rich color palette and beautiful movement. The dark background paired with the cobalt and smoky white foliage creates a striking look that feels both dramatic and versatile. My original plan was to make a dress with princess seams, buttons, and more structured design elements. However, after spending time with the fabric, I realized that all of those seam lines and construction details would compete with what makes this chiffon so beautiful: its drape, moveme...