Skip to main content

Made by a Fabricista: What to Make with Silk Taffeta



You may have noticed that Fabric Mart has a *HUGE* selection of silk taffeta right now.  A lot of it is either large plaid or large stripes.   I was curious about it, and not really sure what I could make with it, but I just knew it would be gorgeous fabric and had to play around with it.  Turns out, it's actually great for quite a range of projects!  The dress above is my third project.


Let me show you the first two. My first was to make some queen size pillow shams.  They are the plaid ones in the back of the photo.  I also made the two printed ones in the center from another Fabric Mart home dec fabric special! 


I wanted to make the covers removable with a zipper, and include a braided trim.  As luck would have it, I found a whole card of braided trim at an estate sale that worked with my taffeta for just $2!


To start, I used a zipper foot to stitch down the braided trim all around one side of the pillow. Then I serged a piece of lining fabric to the back of each side.  I don't think that you would have to line these, but I'm using down feather pillows, so I thought that the lining might be a barrier to feathers poking out.


For the corners, I trimmed the braided trim and wrapped tape around the ends so that they wouldn't ravel.  Then, I just pushed the edges together at a corner, so that after the pillow was turned, they would be on the inside, like this:


Then, I went back and sewed the zipper face down over the braided trim, as if it would be an invisible zipper.


This is what it looked like before I sewed them together.


And this is the zipper afterwards-you can just barely see it under the trim.


It's hard to capture the sheen on these pillows, but they are really quite beautiful and rich-looking in person! I used 2-1/4 yards of the silk, and I lined them with 2-1/4 yards of drapery lining.  I had about a 12" wide piece of silk left from cutting the pillows, so I decided to make a table runner for our foyer table from it.


On the back side, I used the drapery lining, and did a similar thing with the braided trim.  I think that the braided trim really is a simple way to make things look high end.


I finished it just in time for a bridal shower that we were hosting, and another great coincidence- the letters of their names were painted in the same shade of green!


And now back to the dress!  I wanted to make something to wear from the taffeta for the shower, but didn't want anyone to see the pillows and table runner, and be able to know that it was the same fabric.  So, I took a 2-1/2 yard piece of the taffeta, and dyed it with 2 Tbsp of navy blue fabric dye.  It absorbed the dye so fast, I couldn't believe how much it changed it!  It turned it into kind of a denimy blue with lavender accents.  Here is the before and after side by side:


The texture became a little limper, and slightly less shiny, but I definitely prefer it for less formal clothes.  It's been a million degrees here with unspeakable humidity, so I decided to make a  loose-fitting sleeveless dress that I could wear for the bridal shower.


I found a simple a-line dress pattern with center front and back seams, so that I could cut it on the bias and match the plaid design.


I had a one yard package of lavender beaded trim that I used to accent the pockets and neckline, and used a self bias strip turned to the outside to finish the neck.  Even though it's simple, this was a technically challenging project to get everything to line up just so!


I got a lot of compliments on it at the shower, and one very nice surprise, was that it didn't wrinkle much at all!  These photos were taken after a very long day, setting up and then hosting the shower, and then even a nap afterwards, and there are really no more creases than there were to begin with!  The crinkly texture was there all along.


Sewing with silk taffeta is really easy- it presses well and it doesn't slip around when cutting or sewing like some silks do.  Have you tried sewing with silk taffeta?  If yes, what did you make?


Happy Sewing!
Ann

Comments

  1. The pillows and runner are beautiful! A great addition to your home! And your dress is perfect! Is it NL 6430? If so, I've just made 3 of them and love that pattern. So if course you couldn't go wrong using it with the silk taffeta...and now you've got me thinking that I need one more from a washed taffeta silk.

    ReplyDelete
    Replies
    1. Thanks, Carolyn! Yes, I think you need one more too! I used Kwik Sew 3049 for this one. It's long out of print, but a great one for a bias dress.

      Delete
  2. Beautiful! I love the home projects and the use of the trim - on all of the projects. The beaded trim just adds a little pop. Very nice. g

    ReplyDelete
    Replies
    1. Thanks,g! I agree, if you can find the right trim, it can really elevate a project.

      Delete
  3. Such a lovely combo ... FIESTA ;)

    ReplyDelete
  4. I definitely need to try my hand at those pillows and that table runner. Just beautiful. Thank you for sharing.

    ReplyDelete
  5. I love that dress! I especially like the way you matched the plaid to form the smaller squared down the center, it really sets off the larger squares of the fabric. I searched for this fabric from the moment I saw your dress, or something in the same size range in a very even plaid, but alas, I couldn't find anything.....until I looked in the sale section and bought the last piece! Yay! I'll make it without dying it although I love the color yours became. But I like the original color, too, and won't be competing with a table runner!

    ReplyDelete
    Replies
    1. Thanks, freemotion! Glad to hear that you got the last piece and hope your dress turns out great!

      Delete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: A Wardrobe Staple for Spring - A Denim Coat

Hello Sewing Friends! It’s Sharon with Sharon Sews with my latest Fabricista make – a denim coat  for spring.  Denim is a wardrobe staple for many of us, and even more so this year with denim on denim looks coming back in style.  The denim I used is a medium weight cotton/lycra blend with about a 20% stretch selvage to selvage.  Fabric Mart always does an amazing job photographing and describing their fabrics, yet I still gasped in delight when I opened the package containing my denim.  It was even better than I had anticipated. This fabric would have worked well for a traditional denim jacket – one with button front closure, chest pockets with flaps, and a collar.   However, I have wanted to sew this open front coat with kimono inspired sleeves and big patch pockets since February 2021.  I saw it in that month’s  BurdaStyle Magazine, bookmarked the page, and promptly forgot about the coat.  It’s coat #105 if you’re interested in sewing one for yourself. Fortunately, I went on an organ

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month!  This year is the year I challenge my sewing skills.   I have wanted a moto jacket for some time.  Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one.  The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting.    Remember when I said I wanted to challenge my sewing skills?  😉 This fabric was beautiful but fragile to work with.  It was a great mental challenge that had me problem solving before sewing to avoid any potential problems.  I first traced out the pattern onto tissue paper to determine the fit.   I used scrap cotton fabric to sew up a “practice run” of the jacket.    I was pleasantly surprised at how easily the jacket comes together.   I sewed up the muslin in one evening.  It was time to cut into the beautifu

Made By A Fabricista: My Version of the Infamous DVF Wrap Dress

Just in case you are not aware, the iconic Diane Fustenberg wrap dress has turned 50 this year.  In celebration, Vogue has re-released the DVF Wrap Dress pattern, which now comes in extended sizes.  This dress is so classic and fits many different body types.  I got a hold of this pattern and decided this would be my birthday dress this year. This pattern is categorized as a Very Easy Vogue pattern, and I would have to agree with that. Wrap dresses are usually relatively simple to put together since there aren’t that many pattern pieces to sew together. I made View A in a size 22 and the only modification I made was to shorten the hem by 6 inches.  I will say that since I used a Ponte Knit , I could have gone down to a size 20.  I didn’t read the fabric suggestions before picking my fabric.  I’ve always remembered seeing the DVF Wrap dress in knits. After reviewing the fabric suggestions, they do say that you can use soft fabrics, like a Challis or a Chambray. As I mentioned, I’ve alwa