Skip to main content

Made by a Fabricista: Ginger Jeans and Willamette Shirt

Image
By

Hey there and happy New Year! This new year has started off so busy, but also so good! In 2019 I didn't sew nearly as much as I usually do, and if January is any indicator to how much I'll sew in 2020, it's going to be a sewing packed year! I'm excited to share my first two sews of 2020, a pair of Ginger Jeans and another Willamette top.


The last time I sewed ginger jeans, I sewed three pairs all at once...yikes! You can read a bit about those jeans here. Then I was set...I didn't need any more skinny jeans for quite a while, actually two years exactly!!! Well, those jeans have either worn out, or don't fit me anymore, so it was time for a new pair.


In December I looked around at the Fabric Mart website and found some Japanese denim that was in stock and grabbed a couple yards. (This fabric isn't available anymore, but denim is always popping up in the Fabric Mart shop!) I also grabbed a jeans hardware kit, which is so helpful to have the zipper, button, denim needle, and rivets all packaged together.



Sewing jeans came back to me quickly! All in all, I sewed these together in just three days, squeezing in a couple hours of sewing here and there. I actually really enjoy sewing a more involved project like jeans. It's fun to chip away at a bigger project and see it come together!



The other thing I've sewn so far in 2020 is another Willamette shirt. I love the last Willamette shirt that I sewed, so I was excited to add another one to my closet! This one is sewn in a polyester crepe (no longer in stock). I used to be a bit of a polyester snob, never wanting to sew with it, but I've learned that I absolutely love polyester crepe. It drapes beautifully and sews easily!



I have two more sewing projects cut out and sitting at home waiting for me to sew this week, which will bring my 2020 sewing total up to 4, and we're only one month into the year! How has 2020 been for you so far? I hope it's off to a great start!


Quick Recap

Jeans
pattern: ginger jeans
fabric: Japanese denim (no longer in stock)
notions: denim hardware kit
size: 6 graded to an 8 at the hip
modifications: I sewed these with a 3/8 inch seam all the way down the outer leg and inner leg. I probably could have sized up since I sewed my side seam allowances 1/4 inch smaller than the pattern calls fo

Top
pattern: willamette shirt
fabric: poly crepe (no longer in stock)
size: 4
modifications: I sewed view A, and changed it to a full button down simply by adding button holes and buttons, there's already an interfaced placket in place

Thank you Fabric Mart Fabrics for such great sewing material!

Comments

  1. VanessaJanuary 23, 2020 at 2:02 PM

    I love this outfit combination!! I am working on an olive pair of Ginger jeans now. Yours look so good!!

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Closing 2025 with a Lined Jacket

By
Hello again, sewing friends! It seems we have arrived yet again in the grandest season for layering, all this oncoming cold weather. I like ending the year with something warm and very useful. Seems based on my past Fabricista posts, I love to sew year-end outerwear, and this round is no different!  I challenged myself with a new lined coat (wait, jacket? Coat? I feel like the presence of wool changes things?). Anyhoo, since the lovely Chalk & Notch Den Jacket has been in my queue, I proceeded ahead. I like the large pockets, the option to line or not, and the extra bodice and sleeve seams for topstitching.  Sewing this coat is not at all difficult, but the many pieces and loads of topstitching will take a bit of time. My version took me a few multiple-hour sessions to complete. I sewed a size 2, which matches my measurements, and I made no alterations. Hint: for a quick size test, just employ the lining pieces.  Gorgeous, muted blue as a soft wool flannel ? This is ...
3 comments
Continue Reading »

Made By A Fabricista: Chalk and Notch Wren Dress: My Buffet dress for the Christmas season!

By
  I recently sewed the Chalk and Notch Wren dress using a beautifully soft black voile from Fabric Mart, and it turned into such a satisfying, enjoyable project. The pattern itself is very easy to understand and straightforward with clear instructions, intuitive construction, and a relaxed fit that makes the sewing process easy. A buffet dress in the sewing community is a dress that is loose fitting, so you can eat at the buffet without your dress being uncomfortable afterwards, lol! Because the voile I chose is extremely thin and transparent, I opted to line the bodice and first tier. Adding a lining not only provided modesty but also gave the delicate fabric a bit more stability, especially around the neckline and button placket. A helpful tip when sewing a lining into a lightweight bodice is to treat the lining and the main fabric as one. I sewed the bodice as you would for a lined bodice, and the first tier I sewed the pieces together with a basting stitch to make the process...
3 comments
Continue Reading »

Made By A Fabricista: Sheer Elegance and Everyday Comfort with my Two New Tops

By
Hello Sewing Friends! It’s Sharon from Sharon Sews with my last Fabricista make for 2025. While many sew a special holiday outfit at year’s end, I went in another direction sewing two tops that couldn’t be more different. One is sheer and elegant while the other is easy comfort for everyday wear.  These tops reflect how I dress at this stage of life. As an over-50 sewist, these two tops reflect how I dress at this point in my life.  Sometimes I want something a bit special, other times more basic. Either way, sewing them in beautiful fabrics, custom fit to my body, makes all the difference in how I feel when I wear them. Even though I’m quite pleased with my two tops, my original plan was to sew a jacket with the tropical print stretch twill and pair it with a top sewn from the soutache mesh knit . Sadly, I wasn’t quick enough to get enough of the stretch twill to make a jacket, so a top it was!  You do know you have to act fast when you see something you love on Fabric ...
3 comments
Continue Reading »