Skip to main content

Made By A Fabricista: Let’s Make a Leather Bag

Hi Guys! I’m trying something a little different today.  We are going to make a leather bag.  I was looking around the Fabric Mart website for fabric for my next project and I came across Sue’s Pick.  The fabric choice for that day was this gorgeous black leather fabric. The best part was that the leather was only $20 a piece.  When I received it at home, I couldn’t believe how soft the leather was. I was in love.


First, we are going to make the pattern and then we’ll sew it up.  You are going to need a ruler, pencil, and scissors to draft the pattern.

Purse Pattern

Main Pattern Piece – Cut 2

1. Make a 14 x 16 rectangle.  

2. At the bottom of this pattern piece, you will cut a 2 x 2 square on each side.

3. At the top of this pattern piece, measure in 1” on each side and then measure from that point down to the corner of the cut-out square at the bottom. Cut that piece off.

Pocket Piece – Cut 1

4. Make a 7 x 10 square.

5. Go in ½” at the top and go down 3” on each side. Cut that section off.

Straps – Cut 2

6. Make a 2” x 32” rectangle. 

Cut all your pattern pieces and let’s sew!

Select one of your main pattern pieces to make it the front.  Find the center of your front pattern piece and edge your pocket piece leaving the top open.  Sewn down the middle of your pocket piece to make 2 pocket openings if you like.

With right sides together, use clips to hold your pattern pieces together and sew the 2 sides and the bottom using ¼” seam allowance.



Pin together the bottom corners and sew at ¼” seam allowance.

Turn your bag right side out.

Take your straps and fold them in half and edge stitch down the 2 long sides of the strap or you can glue them closed.  Mark 2 inches at the bottom of each strap and attach it the sides of the bag.  I used glue.

You are all done! You just made a leather bag.



How do you think I did?  I hope you like my bag just as much as I do.  Let me know if you ever get around to making this bag and make sure you keep your eye out on the Fabric Mart site for amazing deals.

Until next time!

JOHANNA @soveryjo  


Unfortunately Fabric Mart Fabrics sell out quickly!
You can find similar fabrics by shopping the following categories: LEATHER.

Comments

  1. This is great!!! Love it!

    ReplyDelete
  2. Thank you Jazz. You inspired me to make a leather bag!

    ReplyDelete
  3. Wow! I love the bag and the shape of it and of the outside pocket. I think it gives it some “personality.” What type of glue did you use to attach the straps? Thanks for sharing

    ReplyDelete
  4. Fabulous bag. This is the first time I recall a Fabricista sew something with Fabric Mart leather. I have purchased so many garment weight leather skins, both smooth and hair on (shearling etc.) from FM over the years. They are always great quality, unique textures and colors, and when they are on sale, the heck with my budget.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Falling for Knits

We are now well into Fall, even though the temps are still relatively warm here in Texas.  I love the fall season and dressing for Fall.   When it comes to the conversation of knits vs. wovens I typically sew mostly wovens. So for this post I decided to sew completely knits!  With the holiday season right around the corner I saw these three dress styles as perfect for Friendsgiving/Thanksgiving gatherings.  The first look is a tried and true pattern Simplicity S9372.  Using this gorgeous burgundy ponte knit , I like how this pattern fits throughout. I chose this color to add to my typically neutral palette in my closet.  I also wanted something I could wear to my sorority meetings and found this color perfect.  It's an easy sew with back fisheye darts  and invisible zipper to add to the tapered style.  The neckline and armholes are finished with bias binding giving it a clean finish on the inside.  I used a universal needle to sew a...

Made By A Fabricista: Closing 2025 with a Lined Jacket

Hello again, sewing friends! It seems we have arrived yet again in the grandest season for layering, all this oncoming cold weather. I like ending the year with something warm and very useful. Seems based on my past Fabricista posts, I love to sew year-end outerwear, and this round is no different!  I challenged myself with a new lined coat (wait, jacket? Coat? I feel like the presence of wool changes things?). Anyhoo, since the lovely Chalk & Notch Den Jacket has been in my queue, I proceeded ahead. I like the large pockets, the option to line or not, and the extra bodice and sleeve seams for topstitching.  Sewing this coat is not at all difficult, but the many pieces and loads of topstitching will take a bit of time. My version took me a few multiple-hour sessions to complete. I sewed a size 2, which matches my measurements, and I made no alterations. Hint: for a quick size test, just employ the lining pieces.  Gorgeous, muted blue as a soft wool flannel ? This is ...

Made By A Fabricista: Chalk and Notch Wren Dress: My Buffet dress for the Christmas season!

  I recently sewed the Chalk and Notch Wren dress using a beautifully soft black voile from Fabric Mart, and it turned into such a satisfying, enjoyable project. The pattern itself is very easy to understand and straightforward with clear instructions, intuitive construction, and a relaxed fit that makes the sewing process easy. A buffet dress in the sewing community is a dress that is loose fitting, so you can eat at the buffet without your dress being uncomfortable afterwards, lol! Because the voile I chose is extremely thin and transparent, I opted to line the bodice and first tier. Adding a lining not only provided modesty but also gave the delicate fabric a bit more stability, especially around the neckline and button placket. A helpful tip when sewing a lining into a lightweight bodice is to treat the lining and the main fabric as one. I sewed the bodice as you would for a lined bodice, and the first tier I sewed the pieces together with a basting stitch to make the process...