Skip to main content

DIY Tutorial: Infinity Scarves

Have a person on your gift list, but have no idea what to get for them? Making a gift is the perfect idea and it will be even more thoughtful than a silly little gift they don't really want anyway.

Infinity scarves are super easy and quick to make. They are called infinity scarves because they look like a continuous piece of fabric in a tubular form. You can make them in almost any type of knit. Knits come in so many different prints that you can make one for every outfit in your closet. 

Here is what you will need: 
- Sewing machine
- 1/2 yard of knit fabric (sweater knit, rayon knit, ITY knit, cotton knit, etc) Should also be 58/60" wide. 
- Thread to match
- Hand sewing needle

1) Fold the 1/2 yard piece of knit in half the long way. Pin along the entire long edge. 


2) Using a thin zig-zag stitch (almost straight stitch), stitch the long edge. I pull slightly on the front and back of the fabric as it goes through the sewing machine so that when the scarf is finished, it can be stretched and the seam does not break. Serge the seam if possible. You should now have a fabric tube, with right sides together. 



3) Put your hand through one open end and grab onto the other open end. Pull the other open end through (still right sides together), matching raw edges (selvedges together) and seams. Pin together.

(Edit 8/14/14, again 12/11/14 --- this is the step where you are sewing the tube ends together. The tube ends are the selvedges. By the comments we received below, this looks to be the place people get confused. I modified the directions the best I can for this step.)

Matching the open ends to create a shorter tube.
  
4) Sew along the raw edges (selvedges of this "tube", making sure to leave an opening to turn right side out. Serge if possible. See left side of photo below:

This is what the scarf should look like before turning it right side out. Left side is the stitched end (selvedge edge)with an opening left for turning. The right side is a folded edge.

5) Turn the entire scarf right side out. Hand stitch the opening closed. 




Tip: You can make a fuller scarf by cutting more than 1/2 yard. 


Make a scarf for everyone on your list! What will you be making as gifts for the holidays?

Comments

  1. Thank you for the idea, now I know what to do with some cute fabric I got in one of your bundles!

    ReplyDelete
  2. Thanks for the great sharing! Wholesale Scarves was given to me for new hope this past year and it has gotten some heavy use. Thus an idea began to blossom.

    ReplyDelete
  3. This is so cutewholesale scarves or wholesale hats.
    ! Good for you! I cannot wait to get my hands on a copy of this magazine; especially this pattern!

    ReplyDelete
  4. I like the scarf. The directions are good, but you do not tell about connecting the two ends "together" to make a continuous circle.

    ReplyDelete
    Replies
    1. I was confused about that step, also. Great idea! Just could have been explained more clearly on that portion...and with adding "connecting the two ends together to make a continuous circle."

      Delete
    2. I sew, and I agree that step was still missing or confusing or both.

      Delete
    3. I sew, and I just do not get it. How do you sew both ends together?!?!?

      Delete
    4. I just modified the directions again in steps 3/4. You want to bring your selvedges together, right sides together. I hope that helps! Let me know if it does not.

      Delete
  5. I love this tutorial AND that fabric! I plan on making one of these this weekend, hope it looks as great as yours!
    Now following :-)

    ReplyDelete
  6. I am so happy to find instructions for sewing these great scarves...how do sew the ends together to make it a continuous circle?

    ReplyDelete
  7. Tuck one end inside of the other end and sew flat.

    ReplyDelete
  8. Tuck one end inside of the other end. I turn the edges of the outside circle under so raw edges do not show. Then sew straight across. That will make a circle. Hope this helps.

    ReplyDelete
    Replies
    1. Can you use a machine for that or do you have to hand sew it?

      Delete
    2. You use a machine to stitch this. I just modified the directions a bit because that is where people seem to get confused.

      Delete
  9. Thanks for sharing, I'm planning to make couples for Christmas

    ReplyDelete
  10. Is the 60" fabric? Great directions. Thank you so much.

    ReplyDelete
  11. Is the fabric 60"? Thank you for the great instructions.

    ReplyDelete
  12. I made one of there in less than 30 minutes ---LOVE it! Running out now to buy more fabric! Thanks for the great idea and instructions!

    ReplyDelete
  13. I am excited to try this but I don't have a serger or zig zag my machine is old and was my grandmother's. Over 60 years old but in excellent working condition.

    ReplyDelete
    Replies
    1. Try pinking shears to trim the edge cleanly
      or..
      sew a double seam, another row of stitches close to the first seam
      or..
      if your fabric does not fray (bonus) DO NOTHING

      Delete
  14. Infinity scarf is one of the best gift you can give to your friends or your loved ones, since it is always in on fashion. Infinity scarf can be worn in many ways in different occasion, season and etc. If we know how to knit, we can make one of it for ourself based on what we want. Thanks for sharing this tutorial!

    ReplyDelete
  15. I have to say that it was confusing on step 4, but I had faith that it would work out, If it didn't, then your seam ripper is your best friend.
    Scarf turned out beautifully. I'm going to make these for gifts.

    ReplyDelete
  16. Thanks for a great tutorial. I couldn't fathom it out in my mind, but I just followed step by step and it all worked!

    ReplyDelete
  17. Barb from Reading, PAMay 6, 2018 at 8:54 PM

    I have made several of these scarves and have tried several techniques. The one I find easier is to sew the long edge but leave about a 6" opening about 6" in from one end. You then pull the ends up through that opening and machine stitch the ends together. Pull the whole scarf through that opening while turning right side out and slip stitch that 6" opening closed. Voila! For some reason the long edge is more stable and easier to hand sew closed than the end

    ReplyDelete
  18. You can also twist the ends before you stitch them together. It gives an automatic nice twist to the scarf.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: A Wardrobe Staple for Spring - A Denim Coat

Hello Sewing Friends! It’s Sharon with Sharon Sews with my latest Fabricista make – a denim coat  for spring.  Denim is a wardrobe staple for many of us, and even more so this year with denim on denim looks coming back in style.  The denim I used is a medium weight cotton/lycra blend with about a 20% stretch selvage to selvage.  Fabric Mart always does an amazing job photographing and describing their fabrics, yet I still gasped in delight when I opened the package containing my denim.  It was even better than I had anticipated. This fabric would have worked well for a traditional denim jacket – one with button front closure, chest pockets with flaps, and a collar.   However, I have wanted to sew this open front coat with kimono inspired sleeves and big patch pockets since February 2021.  I saw it in that month’s  BurdaStyle Magazine, bookmarked the page, and promptly forgot about the coat.  It’s coat #105 if you’re interested in sewing one for yourself. Fortunately, I went on an organ

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month!  This year is the year I challenge my sewing skills.   I have wanted a moto jacket for some time.  Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one.  The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting.    Remember when I said I wanted to challenge my sewing skills?  😉 This fabric was beautiful but fragile to work with.  It was a great mental challenge that had me problem solving before sewing to avoid any potential problems.  I first traced out the pattern onto tissue paper to determine the fit.   I used scrap cotton fabric to sew up a “practice run” of the jacket.    I was pleasantly surprised at how easily the jacket comes together.   I sewed up the muslin in one evening.  It was time to cut into the beautifu

Made By A Fabricista: My Version of the Infamous DVF Wrap Dress

Just in case you are not aware, the iconic Diane Fustenberg wrap dress has turned 50 this year.  In celebration, Vogue has re-released the DVF Wrap Dress pattern, which now comes in extended sizes.  This dress is so classic and fits many different body types.  I got a hold of this pattern and decided this would be my birthday dress this year. This pattern is categorized as a Very Easy Vogue pattern, and I would have to agree with that. Wrap dresses are usually relatively simple to put together since there aren’t that many pattern pieces to sew together. I made View A in a size 22 and the only modification I made was to shorten the hem by 6 inches.  I will say that since I used a Ponte Knit , I could have gone down to a size 20.  I didn’t read the fabric suggestions before picking my fabric.  I’ve always remembered seeing the DVF Wrap dress in knits. After reviewing the fabric suggestions, they do say that you can use soft fabrics, like a Challis or a Chambray. As I mentioned, I’ve alwa