Skip to main content

Sew Along: Winter Coat Update - Muslin and Matching Plaids

Since the last time I wrote about the Burberry-inspired winter coat I am making, I've made a small amount of progress, but it was well worth it. I was able to put together the muslin, which surprisingly only took me an hour or so to get fit. For those of you that do not like doing a muslin, I would say to try and overcome the dislike. (I don't "like" it either! But it will save me time and money in the long run.) It will really help you see what needs to be altered and adjusted. I had to bring the shoulders in a little bit. (This is something I notice in a lot of Simplicity patterns, so I was expecting it.) I also wanted to make my coat shorter, so it allowed me to see how long the coat should be.


Overall I would say that making the muslin was fast for a few reasons: 
1) I used a basting stitch on all seams so I could take them out if I needed to.
2) I did not make the coat in its entirety. There is no reason to construct the entire garment (facings and details) since you are only trying to get the fitting right.

I will keep the muslin handy in case I need to try out a tricky section instead of messing up the good fabric.

After having the muslin tweaked, I moved on to cutting out the good fabric! I was nervous to cut it out because I do not have a lot of experience with matching plaids. It was easier than I thought, just time-consuming! It literally took me 2 hours to cut everything out. I cut out each piece, one at a time, rather than folding fabric in half like patterns usually call for. I started with the "back" piece and used that as a basis for all the matching that needed to be done. Once I cut out one piece, I would remove the paper pattern piece and turn the fabric over (right sides together) to cut out the second piece. (You want to make sure that you get a mirror image of the pattern piece.)  I matched up the plaids by pinning every larger section of the plaid to the corresponding pattern on the uncut fabric. See the picture below for reference. 

Do you see the pattern piece on the fabric??
I used the triangle tabs to match up separate pattern pieces so that when the coat is sewn together the plaids should match up pretty well. (Hopefully!)

Next I will be cutting out the interfacing, flannel interlining and the silk lining. More updates to follow!

Do you have a tip or story about a time you were trying to match plaids? 

Comments

  1. looking good! plaid isn't really hard, as you say, just requires extra time and patience.

    ReplyDelete
  2. Thanks! I can't wait to work on it again this weekend!

    ReplyDelete
  3. Thank you for this post! I have pretty much avoided plaids as well as muslins and need this kind of encouragement. My measurements have slightly shifted, oh my! Where before I fit exactly to pattern measurements, these days those patterns need a tweak here and there, like at the back shoulder, waist girth, and so on. I've come to that turning point where muslins can make the difference between success and failure, and since I love beautiful fabrics and great results, I opt for success...or hopefully so anyway :)

    ReplyDelete
  4. I'm glad I was able to help encourage you to work with plaids and muslins! I also just didn't want to give it a try, but am so glad that I did. Most of my sewing involves projects to sell on my etsy shop and it get sort of repetitive. So a project like this where I'm learning something and concentrating on a specific task is fulfilling! ~Julie

    ReplyDelete
  5. I have a question about the flannel lining. Do you cut the flannel just like the other lining and put the "real" lining on top of it?

    ReplyDelete
  6. Thank you for your question! We recommend cutting out the fleece lining with the wool. (You could possibly even cut them at the same time, I would imagine it would keep your fabric from moving when you are cutting so precisely.) From there sew the fleece lining to your wool pieces. You want the exterior to be the sturdy part, adding it to the lining would make the lining bulky when you want that part to have some fluidity.

    Hope this helped!

    ReplyDelete
  7. Another question, should I make the jacket a size larger to accommodate the flannel lining? Or if I put the, together will that sole any kind of bulking problem?

    ReplyDelete
  8. Sorry, I missed this question. I did not cut it out larger. The flannel does not put enough bulk in it to do so.

    ReplyDelete
  9. Thanks! I wasn't sure and I didn't want to move ahead on it without guidance! Coats, other than fleece pullovers, are new to me.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: Comfy Palazoo Pants - Mommy and Me

Happy Saturday All! How have you been coping with this sudden change? 2020 is the year of adjustments and most of us will probably never forget due to the Covid-19. I am in the acceptance phase and the first 2 weeks were challenging for me to cope at first. I honestly adjusted around week 3 and have learned to cope and made the best out of it.


To get my daughter Arielle out of the house after not leaving for a month, I decided that I would make a few pieces that were on my to-make list and convince her to dress up so that I can shoot. She has been begging for a few palazzo pants since January and since we both have been home since March and I had no excuse, I just did it.


Arielle fell in love with the linen I used for my last Fabric Mart make in March and I had promised her that I would use the remaining linen in bright tan here to make her something.



I decided to use Simplicity 8605 palazzo pants to recreate a similar ready to wear pants she had.

It came out perfect and the size ext…

Made by a Fabricista: Flowers for spring

Hello all!  I hope this finds you well and healthy!  As I write this post, I am still WFH and still in need of COMFORT!  Know what I mean?  When I was drooling over FMs catalog and trying to pick out my fabric, I found myself ordering this gorgeous and soft double brushed poly. 
You can see the fabric I used here: double-brushed-jersey-knit Here are some lovely choices too: Double Brushed Poly Choices  Have you tried this fabric yet?  I can't think of anything softer.  


Of course then comes all sorts of dilemmas.  What do I make?  Maxi? Dress?  Tops?  Cardigan?  Pants?  I spent a good week just looking at this and finally came up with separates so I could have some ultimate comfort clothing.  I love the look of jumpsuits, but I remember back in the day getting undressed to use the restroom and that was appealing to me.  I settled for second best and made pants and two different tops.
Here's a link to the pants pattern I used: Pippa pants
And here are the two top patterns I …