Skip to main content

Sew Along: Winter Coat Update - Muslin and Matching Plaids

Since the last time I wrote about the Burberry-inspired winter coat I am making, I've made a small amount of progress, but it was well worth it. I was able to put together the muslin, which surprisingly only took me an hour or so to get fit. For those of you that do not like doing a muslin, I would say to try and overcome the dislike. (I don't "like" it either! But it will save me time and money in the long run.) It will really help you see what needs to be altered and adjusted. I had to bring the shoulders in a little bit. (This is something I notice in a lot of Simplicity patterns, so I was expecting it.) I also wanted to make my coat shorter, so it allowed me to see how long the coat should be.


Overall I would say that making the muslin was fast for a few reasons: 
1) I used a basting stitch on all seams so I could take them out if I needed to.
2) I did not make the coat in its entirety. There is no reason to construct the entire garment (facings and details) since you are only trying to get the fitting right.

I will keep the muslin handy in case I need to try out a tricky section instead of messing up the good fabric.

After having the muslin tweaked, I moved on to cutting out the good fabric! I was nervous to cut it out because I do not have a lot of experience with matching plaids. It was easier than I thought, just time-consuming! It literally took me 2 hours to cut everything out. I cut out each piece, one at a time, rather than folding fabric in half like patterns usually call for. I started with the "back" piece and used that as a basis for all the matching that needed to be done. Once I cut out one piece, I would remove the paper pattern piece and turn the fabric over (right sides together) to cut out the second piece. (You want to make sure that you get a mirror image of the pattern piece.)  I matched up the plaids by pinning every larger section of the plaid to the corresponding pattern on the uncut fabric. See the picture below for reference. 

Do you see the pattern piece on the fabric??
I used the triangle tabs to match up separate pattern pieces so that when the coat is sewn together the plaids should match up pretty well. (Hopefully!)

Next I will be cutting out the interfacing, flannel interlining and the silk lining. More updates to follow!

Do you have a tip or story about a time you were trying to match plaids? 

Comments

  1. looking good! plaid isn't really hard, as you say, just requires extra time and patience.

    ReplyDelete
  2. Thanks! I can't wait to work on it again this weekend!

    ReplyDelete
  3. Thank you for this post! I have pretty much avoided plaids as well as muslins and need this kind of encouragement. My measurements have slightly shifted, oh my! Where before I fit exactly to pattern measurements, these days those patterns need a tweak here and there, like at the back shoulder, waist girth, and so on. I've come to that turning point where muslins can make the difference between success and failure, and since I love beautiful fabrics and great results, I opt for success...or hopefully so anyway :)

    ReplyDelete
  4. I'm glad I was able to help encourage you to work with plaids and muslins! I also just didn't want to give it a try, but am so glad that I did. Most of my sewing involves projects to sell on my etsy shop and it get sort of repetitive. So a project like this where I'm learning something and concentrating on a specific task is fulfilling! ~Julie

    ReplyDelete
  5. I have a question about the flannel lining. Do you cut the flannel just like the other lining and put the "real" lining on top of it?

    ReplyDelete
  6. Thank you for your question! We recommend cutting out the fleece lining with the wool. (You could possibly even cut them at the same time, I would imagine it would keep your fabric from moving when you are cutting so precisely.) From there sew the fleece lining to your wool pieces. You want the exterior to be the sturdy part, adding it to the lining would make the lining bulky when you want that part to have some fluidity.

    Hope this helped!

    ReplyDelete
  7. Another question, should I make the jacket a size larger to accommodate the flannel lining? Or if I put the, together will that sole any kind of bulking problem?

    ReplyDelete
  8. Sorry, I missed this question. I did not cut it out larger. The flannel does not put enough bulk in it to do so.

    ReplyDelete
  9. Thanks! I wasn't sure and I didn't want to move ahead on it without guidance! Coats, other than fleece pullovers, are new to me.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Recent Posts You Might Like

Help Our Buyers Shop!

  Comment on this post with what you are looking for right now and our buyers will seek it out!  I am craving wool gabardines and ponte knits in fun autumn colors. What about you?

Two fantastic linen dresses, without breaking the bank!

 Dory's Make: If you are thinking of going on a vacation, let’s say Italy or France, this would be a wonderful dress to take along. Dory used Simplicity 0330/1810  (a 2012 pattern) and a beautiful 55% linen 45% rayon fabric to create a very comfortable cornflower blue floral dress.  The Fabric Mart fabric was easy to work with. It does have a slight slub to the fabric and tends to ravel.  Easy to fix with either overlocking the edges or using a french seam.   This dress has pleats in the bodice and pleats in the sleeves as well as two darts in the back where you stitch your belt into.  It’s not a difficult make.  There are no buttons or zippers.  The V neck is a perfect length, not too low or too high.  I love this fabric and hope to make some other clothes out of the same kind!  Dee's Make: A woven linen and rayon blend from Fabric Mart fabrics makes for an easy-to-wear, comfortable, colorful fall dress!     Simplicity 88...

The Perfect Sewing Reset - Sewing the Noodlehead Fieldstone Tote

Hi everyone, this is Byrd with my latest Fabricista make! After a very busy summer sewing vacation looks and adding lots of new garments to my handmade wardrobe, I was ready to change up the pace with something completely different. For my November Fabricista make, I chose the Noodlehead Fieldstone Tote , using Fabric Mart’s Midnight Navy Cotton Looped Back Denim paired with a beautiful white and dark royal blue 100% cotton floral poplin for contrast. I love how these two fabrics work together—the deep navy gives the bag a classic foundation while the floral print adds just the right amount of interest. I’ve sewn a Noodlehead pattern before and really enjoy their patterns, so I was excited to find the Fieldstone Tote on the Fabric Mart website. The instructions are clear, detailed, and thoughtfully organized, which makes the construction process easy to follow even if bag making isn’t something you do regularly. I sewed the regular size, and another thing I love about this project is...

Made by a Fabricista: Made for Mom

This month's post features a special person, my mom! Everyone says we are twins. We don't see it but we've heard it enough that we just accept it. However, we do concede that we share some of the same mannerisms, traits and tastes. Fashion is one thing we typically agree on, so I'm pretty sure that I'll be dressing like her in another 30 years. As soon as I saw Vogue 1550 I thought of my mom. It just screamed MOM! She had recently shared that she needed a few outfits for a summer trip and I knew this look would be perfect for her.  I am typically a pretty selfish sewer but this summer I've set aside some time to sew for my immediate family. I have to say I really love Vogue's Summer 2017 patterns as proven by the fact this is the third one I've sewn up (See V9259  and  V1546 ). The recommended fabric is linen which happens to be one of her favorites so using Fabric Mart's Designer Quality Linen was a no-brainer. The only question...