Skip to main content

Sew Along: Winter Coat Update - Muslin and Matching Plaids

Since the last time I wrote about the Burberry-inspired winter coat I am making, I've made a small amount of progress, but it was well worth it. I was able to put together the muslin, which surprisingly only took me an hour or so to get fit. For those of you that do not like doing a muslin, I would say to try and overcome the dislike. (I don't "like" it either! But it will save me time and money in the long run.) It will really help you see what needs to be altered and adjusted. I had to bring the shoulders in a little bit. (This is something I notice in a lot of Simplicity patterns, so I was expecting it.) I also wanted to make my coat shorter, so it allowed me to see how long the coat should be.


Overall I would say that making the muslin was fast for a few reasons: 
1) I used a basting stitch on all seams so I could take them out if I needed to.
2) I did not make the coat in its entirety. There is no reason to construct the entire garment (facings and details) since you are only trying to get the fitting right.

I will keep the muslin handy in case I need to try out a tricky section instead of messing up the good fabric.

After having the muslin tweaked, I moved on to cutting out the good fabric! I was nervous to cut it out because I do not have a lot of experience with matching plaids. It was easier than I thought, just time-consuming! It literally took me 2 hours to cut everything out. I cut out each piece, one at a time, rather than folding fabric in half like patterns usually call for. I started with the "back" piece and used that as a basis for all the matching that needed to be done. Once I cut out one piece, I would remove the paper pattern piece and turn the fabric over (right sides together) to cut out the second piece. (You want to make sure that you get a mirror image of the pattern piece.)  I matched up the plaids by pinning every larger section of the plaid to the corresponding pattern on the uncut fabric. See the picture below for reference. 

Do you see the pattern piece on the fabric??
I used the triangle tabs to match up separate pattern pieces so that when the coat is sewn together the plaids should match up pretty well. (Hopefully!)

Next I will be cutting out the interfacing, flannel interlining and the silk lining. More updates to follow!

Do you have a tip or story about a time you were trying to match plaids? 

Comments

  1. looking good! plaid isn't really hard, as you say, just requires extra time and patience.

    ReplyDelete
  2. Thanks! I can't wait to work on it again this weekend!

    ReplyDelete
  3. Thank you for this post! I have pretty much avoided plaids as well as muslins and need this kind of encouragement. My measurements have slightly shifted, oh my! Where before I fit exactly to pattern measurements, these days those patterns need a tweak here and there, like at the back shoulder, waist girth, and so on. I've come to that turning point where muslins can make the difference between success and failure, and since I love beautiful fabrics and great results, I opt for success...or hopefully so anyway :)

    ReplyDelete
  4. I'm glad I was able to help encourage you to work with plaids and muslins! I also just didn't want to give it a try, but am so glad that I did. Most of my sewing involves projects to sell on my etsy shop and it get sort of repetitive. So a project like this where I'm learning something and concentrating on a specific task is fulfilling! ~Julie

    ReplyDelete
  5. I have a question about the flannel lining. Do you cut the flannel just like the other lining and put the "real" lining on top of it?

    ReplyDelete
  6. Thank you for your question! We recommend cutting out the fleece lining with the wool. (You could possibly even cut them at the same time, I would imagine it would keep your fabric from moving when you are cutting so precisely.) From there sew the fleece lining to your wool pieces. You want the exterior to be the sturdy part, adding it to the lining would make the lining bulky when you want that part to have some fluidity.

    Hope this helped!

    ReplyDelete
  7. Another question, should I make the jacket a size larger to accommodate the flannel lining? Or if I put the, together will that sole any kind of bulking problem?

    ReplyDelete
  8. Sorry, I missed this question. I did not cut it out larger. The flannel does not put enough bulk in it to do so.

    ReplyDelete
  9. Thanks! I wasn't sure and I didn't want to move ahead on it without guidance! Coats, other than fleece pullovers, are new to me.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: Milo + Citrine

Hello sewing friends! It’s Andrea - @happy.things.here on IG and today I’m on the blog to share some sew inspo on one of my favorite kinds of garments to make – cardigans! I absolutely love making them and wearing them year-round, whether it’s an extra layer for around my house in the winter, as my outermost layer in Spring and Fall, or paired with a dress on a cooler summer evening. I love love love cardigans! And there are so many great cardigan patterns out there – chances are that each of your favorite pattern companies offers multiple cardigan patterns. Button-less cardigans are great beginner patterns, and a handmade cardigan is a lovely personalized gift since it’s more forgiving for fit and you don’t have to know someone’s exact measurements to make one. And you can make them in all sorts of knit fabrics too.  Today I chose two cardigan patterns to share with you that I think bring a little something extra to the table. They are the Seamwork Milo and the Made by Rae Citrine.

Week 4: Jeansmaking- What They Made

This is it, the final round! And we certainly did not go easy on our three remaining contestants this time. This round they had to make their own pair of well fitting jeans. I think they all did an absolutely outstanding job! Take a look what these ladies accomplished & be sure to vote for your favorite! (Link at bottom of post.) And, don't forget to show us your me-made jeans on Facebook or Instagram. Details at the bottom of this post. Danesha from  Classyfied Life So first I must say that this entire challenge has been just that...a challenge! Two weeks ago there was hurricane Irma and I was blessed enough to not lose power and then I went out into the aftermath to capture some photos of my submission. Then two weeks ago I had a big trip planned so I had to do EVERYTHING  in two days . Then the BIGGEST challenge of all...THIS week! I got the challenge and I was super excited to have an extra few days and then before I could even get started I ended up in the eme

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month!  This year is the year I challenge my sewing skills.   I have wanted a moto jacket for some time.  Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one.  The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting.    Remember when I said I wanted to challenge my sewing skills?  😉 This fabric was beautiful but fragile to work with.  It was a great mental challenge that had me problem solving before sewing to avoid any potential problems.  I first traced out the pattern onto tissue paper to determine the fit.   I used scrap cotton fabric to sew up a “practice run” of the jacket.    I was pleasantly surprised at how easily the jacket comes together.   I sewed up the muslin in one evening.  It was time to cut into the beautifu