Skip to main content

Sew Along: Winter Coat Update - Muslin and Matching Plaids

Since the last time I wrote about the Burberry-inspired winter coat I am making, I've made a small amount of progress, but it was well worth it. I was able to put together the muslin, which surprisingly only took me an hour or so to get fit. For those of you that do not like doing a muslin, I would say to try and overcome the dislike. (I don't "like" it either! But it will save me time and money in the long run.) It will really help you see what needs to be altered and adjusted. I had to bring the shoulders in a little bit. (This is something I notice in a lot of Simplicity patterns, so I was expecting it.) I also wanted to make my coat shorter, so it allowed me to see how long the coat should be.


Overall I would say that making the muslin was fast for a few reasons: 
1) I used a basting stitch on all seams so I could take them out if I needed to.
2) I did not make the coat in its entirety. There is no reason to construct the entire garment (facings and details) since you are only trying to get the fitting right.

I will keep the muslin handy in case I need to try out a tricky section instead of messing up the good fabric.

After having the muslin tweaked, I moved on to cutting out the good fabric! I was nervous to cut it out because I do not have a lot of experience with matching plaids. It was easier than I thought, just time-consuming! It literally took me 2 hours to cut everything out. I cut out each piece, one at a time, rather than folding fabric in half like patterns usually call for. I started with the "back" piece and used that as a basis for all the matching that needed to be done. Once I cut out one piece, I would remove the paper pattern piece and turn the fabric over (right sides together) to cut out the second piece. (You want to make sure that you get a mirror image of the pattern piece.)  I matched up the plaids by pinning every larger section of the plaid to the corresponding pattern on the uncut fabric. See the picture below for reference. 

Do you see the pattern piece on the fabric??
I used the triangle tabs to match up separate pattern pieces so that when the coat is sewn together the plaids should match up pretty well. (Hopefully!)

Next I will be cutting out the interfacing, flannel interlining and the silk lining. More updates to follow!

Do you have a tip or story about a time you were trying to match plaids? 

Comments

  1. looking good! plaid isn't really hard, as you say, just requires extra time and patience.

    ReplyDelete
  2. Thanks! I can't wait to work on it again this weekend!

    ReplyDelete
  3. Thank you for this post! I have pretty much avoided plaids as well as muslins and need this kind of encouragement. My measurements have slightly shifted, oh my! Where before I fit exactly to pattern measurements, these days those patterns need a tweak here and there, like at the back shoulder, waist girth, and so on. I've come to that turning point where muslins can make the difference between success and failure, and since I love beautiful fabrics and great results, I opt for success...or hopefully so anyway :)

    ReplyDelete
  4. I'm glad I was able to help encourage you to work with plaids and muslins! I also just didn't want to give it a try, but am so glad that I did. Most of my sewing involves projects to sell on my etsy shop and it get sort of repetitive. So a project like this where I'm learning something and concentrating on a specific task is fulfilling! ~Julie

    ReplyDelete
  5. I have a question about the flannel lining. Do you cut the flannel just like the other lining and put the "real" lining on top of it?

    ReplyDelete
  6. Thank you for your question! We recommend cutting out the fleece lining with the wool. (You could possibly even cut them at the same time, I would imagine it would keep your fabric from moving when you are cutting so precisely.) From there sew the fleece lining to your wool pieces. You want the exterior to be the sturdy part, adding it to the lining would make the lining bulky when you want that part to have some fluidity.

    Hope this helped!

    ReplyDelete
  7. Another question, should I make the jacket a size larger to accommodate the flannel lining? Or if I put the, together will that sole any kind of bulking problem?

    ReplyDelete
  8. Sorry, I missed this question. I did not cut it out larger. The flannel does not put enough bulk in it to do so.

    ReplyDelete
  9. Thanks! I wasn't sure and I didn't want to move ahead on it without guidance! Coats, other than fleece pullovers, are new to me.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Pattern Emporium’s Lyrical Top Featuring Fabric Mart Fabrics

 Sewn in a lightweight  rayon challis , this top combines style, comfort, and fluidity. There’s one thing I love in a summer sew: effortless drape—and the Lyrical Top by Pattern Emporium delivered just that. This pattern is a new release, and when I spotted this dreamy rayon challis from Fabric Mart Fabrics, I knew it was the perfect pairing. Lightweight, breathable, and with just the right amount of movement, the fabric really brought the pattern to life. Today, I’m sharing all the details—from fabric choice and construction to styling and fit—plus a few thoughts on why this top might just become a repeat sew. Pattern Overview: The Lyrical Top by Pattern Emporium The Lyrical Top is a relaxed-fit design with bloused sleeves and a gently flared frill cuff. It comes with three sleeve lengths and two neckline variations. I chose the tie-neck view, but there’s also a collar option for a slightly different vibe. I’ve been looking to add more stylish tops to my wardrobe this year, a...

Made By A Fabricista: Oversized Jenna Shirt for Summer Fun

 I may or may not have had several meltdowns during the making of this Closet Core Jenna Shirt… But let’s back up first. During the month of May, I promised to wear handmade garments every single day for the popular sewing challenge “Me Made May.” I really enjoyed thoughtfully putting together my outfits each day. While I was doing this, I was taking notes of the gaps in my wardrobe. Particularly, I don’t have many transitional shirts that could work for on-camera work attire and be comfortable for the weekend. When I saw this delicious cotton lawn on the Fabric Mart website, I knew that I wanted to make a button up shirt that would be both work appropriate and a nice overshirt for summer evenings over my tanks and tees.  I have made a few button up shirts before using a vintage Stretch & Sew pattern but I decided to try my hand at the Closet Core Jenna Shirt (up to a 60” chest) which has had rave reviews on social media and pattern sites for being a great pattern with e...

Made By A Fabricista: A matching set and a happy error.

 Hi sewing friends! Today I’m sharing a new outfit I made inspired by looks I’ve been seeing pop up in my Facebook and IG feeds a LOT this year. I’m talking about those monochromatic matching top and bottom outfits, sometimes in linen, sometimes in a flowy knit - the ones that advertise they go effortlessly from loungewear to office wear to going out wear. So I decided to “sew the look” using Fabric Mart fabric and a few patterns I already in my massive pattern library. First, let me share that I have very few solid color pieces in my closet. I’m so taken in by whimsy and geometric prints that this is still a gaping hole in my wardrobe -  a matching solid color set was actually a practical addition for me.  So let me walk you through how I created this look, and also tip you off to an error I made while cutting that worked out pretty well after all. Can you spot the error? Hint - it’s somewhere in the top: Here’s how I went about building my matchy match outfit. And here’...