Made by a Fabricista: Mommy and Me Time Rompers!

Mothers Day -- There is nothing better than being able to share your craft with the ones you love.

My daughter, Jordan (10 years old) has had very minimal interest in sewing these past years. While I have made her several garments in the past, her desire to learn was minimal at best. Attempts in the past yielded a good hour of attention.

I have been planning on re-introducing her to sewing with some fun summer projects. My daughter loves summer dresses, shorts, colors!

I used a hot pink/coral red/beige/white abstract print poly/lycra Charmeuse found (HERE). While I typically don't lean towards pink garments, I fell absolutely in love with this print!

My daughters pattern is New Look S0814. We opted for a mix between view D and view C. I created view A of this pattern just last week and she wore it to her summer concert at school. I believe her love for the dress sparked her wanting to sew this time around.

My daughter constructed 95% of her garment. I assisted only with the attachment of the flounce and the final hemming. I am so proud and could not stop smiling! She could not wait to wear her romper to school the next day!

My romper was created using a mix of McCall 6848 (bottom) which is my go to for my romper bottoms and Vogue 9085. I made several adjustments to the pattern to accomplish the look I received. First, I cut the pattern 2 inches below the waistband (should I create this pattern again, I will likely double this measurement). Second, I cut lengthened the center front facing to run the length of the shirt. I then attached the facing right sides together, then encased the facing for my next step which was the adding of button holes. The first button hole was placed 6 inches from the next line and every 2 inches after. I then created a 48 inch spaghetti strap for the enclosure.

The sleeves were constructed as per the pattern, but the sleeve casing was omitted and replaced with a hem and 1/4 inch elastic of which I used at the waist as well. My daughter assisted me though this construction by serging and inserting the elastic.

I must say, it was a great Mother's Day!

My silly bean :). Happy Sewing All!

Jenese

Needles and Fashion

Made by a Fabricista: A Wardrobe Staple for Spring - A Denim Coat

Hello Sewing Friends! It’s Sharon with Sharon Sews with my latest Fabricista make – a denim coat for spring. Denim is a wardrobe staple for many of us, and even more so this year with denim on denim looks coming back in style. The denim I used is a medium weight cotton/lycra blend with about a 20% stretch selvage to selvage. Fabric Mart always does an amazing job photographing and describing their fabrics, yet I still gasped in delight when I opened the package containing my denim. It was even better than I had anticipated. This fabric would have worked well for a traditional denim jacket – one with button front closure, chest pockets with flaps, and a collar. However, I have wanted to sew this open front coat with kimono inspired sleeves and big patch pockets since February 2021. I saw it in that month’s BurdaStyle Magazine, bookmarked the page, and promptly forgot about the coat. It’s coat #105 if you’re interested in sewing one for yourself. Fortunately, I went on an organ

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month! This year is the year I challenge my sewing skills. I have wanted a moto jacket for some time. Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one. The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting. Remember when I said I wanted to challenge my sewing skills? 😉 This fabric was beautiful but fragile to work with. It was a great mental challenge that had me problem solving before sewing to avoid any potential problems. I first traced out the pattern onto tissue paper to determine the fit. I used scrap cotton fabric to sew up a “practice run” of the jacket. I was pleasantly surprised at how easily the jacket comes together. I sewed up the muslin in one evening. It was time to cut into the beautifu

Made By A Fabricista: My Version of the Infamous DVF Wrap Dress

Just in case you are not aware, the iconic Diane Fustenberg wrap dress has turned 50 this year. In celebration, Vogue has re-released the DVF Wrap Dress pattern, which now comes in extended sizes. This dress is so classic and fits many different body types. I got a hold of this pattern and decided this would be my birthday dress this year. This pattern is categorized as a Very Easy Vogue pattern, and I would have to agree with that. Wrap dresses are usually relatively simple to put together since there aren’t that many pattern pieces to sew together. I made View A in a size 22 and the only modification I made was to shorten the hem by 6 inches. I will say that since I used a Ponte Knit , I could have gone down to a size 20. I didn’t read the fabric suggestions before picking my fabric. I’ve always remembered seeing the DVF Wrap dress in knits. After reviewing the fabric suggestions, they do say that you can use soft fabrics, like a Challis or a Chambray. As I mentioned, I’ve alwa

Fabric Mart Fabricistas

Search This Blog