Made By A Fabricista: Lilly Pulitzer Inspired Dress

Hello again, Fabricistas!! It's been a while since I blogged last, but I've been lurking about and occasionally sewing. While doing my daily (yes, daily, I am not shy to admit it!) rundown of Fabric Mart's new arrivals, I fell in love with this cotton pique lighthouse print fabric instantly. I did some research for inspiration and quickly figured out this material was for a Lilly Pulizter shift dress in 2014-- I love the Designer Fabric section... I've picked up some sweet designer surprises before in that category. It was not labeled with the designer's name, but I plugged into my search engine a few descriptive words about the print and up came a list of fashion bloggers wearing the original dress and then again on the designer's website.

I made a version of the Lilly Pulitzer Delia Shift dress to fit my figure with a reprinted vintage 1960's pattern, Simplicity 1609. I used View C and cut a 16 bodice and made the skirt much more of an a-line, somewhere about a 20 or so. I also tweaked the overall fit on the side and back center seams, adding here and removing there slightly to fit my shape better.

I originally added my usual 1" on to the length of the bodice, but had to remove it after making my muslin up. I did add an inch to the hemline afterwards.

I have sewn up limited numbers of vintage patterns, and every time I've found that the upper back is monstrously humongous!! I had to remove about 3" total from the front and back upper bodice in total. You can see the before and after on my red and white polka dot muslin below. I also removed the front center seam to keep the print one continuous piece. With that, I added a couple darts at the upper neckline. I extended the back sleeve opening by about 5/8" for my wider back shoulder.

With such simple clean lines, I wanted to get the finishes super nice! I added a lining, it's a lightweight 100% cotton. I used an invisible zipper and of course hand sewed a blind hem.

Overall I'm really pleased with this sweet little dress. I know a die-hard Lilly Pulizter aficionado will be able quickly see it's not an original without the special imprinted hem tape that bares the designer's name... and the fact that my name is sewn in it! Now I'm totally ready for my weekend at the beach, which is exactly where I will be when this blog post goes live!

Happy Sewing!!

~Kathy
Kathy Sews

Made by a Fabricista: A Wardrobe Staple for Spring - A Denim Coat

Hello Sewing Friends! It’s Sharon with Sharon Sews with my latest Fabricista make – a denim coat for spring. Denim is a wardrobe staple for many of us, and even more so this year with denim on denim looks coming back in style. The denim I used is a medium weight cotton/lycra blend with about a 20% stretch selvage to selvage. Fabric Mart always does an amazing job photographing and describing their fabrics, yet I still gasped in delight when I opened the package containing my denim. It was even better than I had anticipated. This fabric would have worked well for a traditional denim jacket – one with button front closure, chest pockets with flaps, and a collar. However, I have wanted to sew this open front coat with kimono inspired sleeves and big patch pockets since February 2021. I saw it in that month’s BurdaStyle Magazine, bookmarked the page, and promptly forgot about the coat. It’s coat #105 if you’re interested in sewing one for yourself. Fortunately, I went on an organ

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month! This year is the year I challenge my sewing skills. I have wanted a moto jacket for some time. Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one. The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting. Remember when I said I wanted to challenge my sewing skills? 😉 This fabric was beautiful but fragile to work with. It was a great mental challenge that had me problem solving before sewing to avoid any potential problems. I first traced out the pattern onto tissue paper to determine the fit. I used scrap cotton fabric to sew up a “practice run” of the jacket. I was pleasantly surprised at how easily the jacket comes together. I sewed up the muslin in one evening. It was time to cut into the beautifu

Made By A Fabricista: My Version of the Infamous DVF Wrap Dress

Just in case you are not aware, the iconic Diane Fustenberg wrap dress has turned 50 this year. In celebration, Vogue has re-released the DVF Wrap Dress pattern, which now comes in extended sizes. This dress is so classic and fits many different body types. I got a hold of this pattern and decided this would be my birthday dress this year. This pattern is categorized as a Very Easy Vogue pattern, and I would have to agree with that. Wrap dresses are usually relatively simple to put together since there aren’t that many pattern pieces to sew together. I made View A in a size 22 and the only modification I made was to shorten the hem by 6 inches. I will say that since I used a Ponte Knit , I could have gone down to a size 20. I didn’t read the fabric suggestions before picking my fabric. I’ve always remembered seeing the DVF Wrap dress in knits. After reviewing the fabric suggestions, they do say that you can use soft fabrics, like a Challis or a Chambray. As I mentioned, I’ve alwa

Fabric Mart Fabricistas

Search This Blog