Skip to main content

Summer of T-Shirts Event: Bell Sleeves

This is the last week in the Summer of T-Shirts Event! We had a lot of fun putting this together for you and I hope it helped broaden your creativity.

If you followed along with us, be sure to post photos of your finished projects on Facebook and Instagram using #FMSummerofTshirts. You will be entered into a random drawing for one of two prizes: a $75 gift certificate for Fabric Mart or 3 patterns of your choice from Palmer/Pletsch or Melissa Watson. Post your photos by August 31st. Winners will be chosen on September 1st.

This week's post is by Tereza from the blog, Sewing For Me. She will be sharing with you how to change straight sleeves into bell sleeves.


I just can't get enough of my StyleArc Adele Top!



For this version, I took into account my changing body as my twins are reaching 20-ish weeks out of 40. With the changes, straight sleeves feel a little snug some days. Therefore, I drafted up 3/4 bell sleeves.



Step 1- Set up your sleeve pattern to 3/4 length.

Step 2- Establish your wrist width. In this version, I added 2" on either side at the sleeve hem then gently curved back to just below the armhole seam line. Leave that seam alone or you'll accidentally be adding to the armhole. Ask me how I know! You can see I free handed the curve so it took a few tries. If you have a hip curve ruler or French curve, use one of those.


Note: I taped my sleeve bell on top so it can be easily removed later. I always try to preserve the original pieces whenever possible.


Step 3- With the wings in place, draw one horizontal line with a straight edge matching the original sleeve cut line. Then draw a second line 1/2" below that.

Step 4- mark the center line of the sleeve over these new hemlines.



Step 5- Draw the new curved sleeve edge starting at the first line at the edges and the second line in the center. Again, a curved ruler makes it easier, but I free handed this curve as well. You can always adjust this during the hemming step if it end be up a little uneven.


Step 6- Now you just cut your new pattern piece out of the paper, and cut your fabric.

You can use the same bell technique on the front and back for a loose tent silhouette too!
I love how this fits! I want to make a few more now!

Comments

  1. Good for you! Your finished project is lovely . Bell sleeves add perfect balance to the silhouette. You look like a very stylish mom. All the best to you and baby!!!

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Bold Aspen Dress for Spring

 As I write this in mid-April, central New Jersey weather is showing small signs of spring. My neighbor’s daffodils are blooming and our magnolia tree is trying to unfold its vibrant magenta petals. I am in the midst of preparing my wardrobe for the warmer months, even if we are still huddling against windy 30 degree days. For me, warm weather means linen. I love breathable, floaty linen sundresses and drapey, loose linen wide-leg pants. My vision for a spring piece was something bold and bright, inspired by the natural colors of blooming flowers, but also something that could transition well between the warmer and cooler months. When I saw Fabric Godmother’s Apsen Dress, I knew that it had the sensible transitional opportunities I was looking for while also providing a blank canvas for fun prints, patterns and colors. With the pattern in mind, I then turned to the stunning linen collection that Fabric Mart always has on hand to see what colors or patterns would best suit my visio...

Made By A Fabricista: Celebrating warm weather with Spring sewing!

Hi sewing friends! I don’t know about you but boy, was winter cold and dreary this year! The weather here in the Philadelphia area has been slowly improving, but Spring sure did take her sweet old time to arrive. So by April, I was definitely in the headspace of needing to sew up things that were either bright and cheery or meant for the warmer weather I am very much craving right now. I recently purchased a few SewBexx Patterns so I took them on a test run to create some Spring makes. First on my list was to make a top using this absolutely gorgeous ITY fabric I picked up last year. I had two yards which was enough for a long sleeve shirt. I chose the Olivia top, which is oversized with a drop shoulder, has multiple lengths and a split hem. I think the pattern is intended for heavier fabrics but I was envisioning how lovely this top would look with the drape of ITY knit fabric, and it did not disappoint. It came together for me quickly and was a straight forward sew…and I love the br...

Made By A Fabricista: Stripes For Spring

Hi everyone!   It’s finally warming up here in southeastern Pennsylvania and I wanted to make a light, flowy dress for springtime. I snagged a vintage Laura Ashley pattern from Joanns on one of my last trips there. I somehow didn’t have anything in my pattern stash with a sweetheart neckline, so I thought it would be a good addition. The pattern calls for a giant gathered skirt, so I knew I would need something lightweight and drapey for it.  Something like a pink striped cotton fine seersucker. The fabric is light and has a really nice drape, almost like a challis . I knew it would gather beautifully. I  got to work cutting everything out, with help from my assistant. When I say the skirt is massive I mean it.  I ran into an issue right away where my fabric isn't wide enough to cut the back panel without opening the fabric out. And my three yards of fabric wasn’t enough to cut two back panels. I ran into this issue last year when making my pinafore dress . In ...