Skip to main content

Getting Active with Kathy


I sew nearly all of my running gear.  Why?!  Several reasons: I want a better fit than I can get in ready-to-wear stuff. The nicer quality activewear I covet is much too expensive for my budget.  Plus I love crazy, loud running clothes-- for the fun of it and for high visibility & safety for the my urban running.  I'm not a fast runner by anyone's standards (but who cares!!) and have not been a super long distance runner but am starting to train for a half marathon in late spring! Making my own running clothes is a huge motivator for me... I sew a sassy new pair of leggings or top, then I just have go out for a run to try them out.


I sewed up three long-sleeved tops and a pair of tights. I used the newly released Surf to Summit Top pattern from Fehr Trade along with the Ooh La Leggings pattern from Papercut. I've sewn every single one of the Fehr Trade patterns (& have been a pattern tester for every single one but actually was not a tester for this particular ladies top) but I muslined it all out first. A few weeks ago Fabric Mart had a wildly amazing sale on a bunch of New Balance fabric found in their Activewear category so of course I ordered (almost) every color.  I used a bold pink from my order for my muslin and some purple and brown supplex bits I had in my stash for the mitts. I made a size small then graded to a large at the hip. I also added 1 1/2" to the length of the hem.  


I found the underarms to be cut pretty high for me and went ahead and cut out 3/4" to lower it some. I've run and hiked in this  pink version and the high underarm didn't cause discomfort, but I felt like there was just a small amount of excess fabric bunched up under there. You can see in the picture below how I removed that wedge from the pattern pieces.


My second version is in the shocking citron. I added in piping on the vertical seams in a dark pink. Both fabrics are that New Balance stuff. It's a polyester/lycra blend and is super stretchy with excellent recovery. I've run, hiked and washed all of these tops a couple times each already with zero shrinkage and no weird stretched out parts. It is a wicking fabric perfect for sweaty activities but I found it to not keep me really warm in below freezing temperatures. I've paired these tops with a fleece vest and it was perfect for the low 30s. In a side by side comparison to some knit Supplex fabric I have, they are basically identical. 


My third Surf to Summit top is a solid grey New Balance fabric I picked up from Fabric Mart when I was in their brick & mortar store in early fall.  I *wish* I bought more of it!!  It's heavier weight and has a very soft wicking back. 


And for the crazy tights.  I cut a medium waist and graded to an large below that.  The legs on the pattern are SUPER long, I hacked off 4" from the hem and I'm 5'8" without shoes!  I blogged about my first pair about a year ago on my blog her
e. The black & white print is nylon/lycra paisley peacock print actually from the swimwear category. It has no wicking properties what so ever, I'd steer clear of this sort of material in really sweaty, hot activity... but for running in colder temps at distances under say five miles, it's no problemo for me.  


I used more of the the dark pink New Balance fabric (the same color as the piping on the citron top) for the upper part of the tights and piping on the seams.  I've actually never done a piping like this before and just improvised a very simple technique.  I cut 1" wide strips long enough to cover the lengths of the seams. I then folded it half, pinned it to the edge of the seam and then joined my seams as usual with my pattern pieces.



I really like shaking things up on my hem finishes.  I sometimes will use a twin needle and other times do a nice looking zig zag stitch.  Both work really well, it's really a matter of what look I am wanting at the moment. I've seen a particular fancy-pants activewear clothing manufacturer use zig zag stitching on their hems and seams and liked the look (rhymes with LuluPhlemon.)


I use a serger for all my seams.  I prefer to use Maxi-Lock Stretch Thread for my activewear serging-- it's soft against the skin and has a "fuzzy" quality like a yarn.  I steer away from the regular cone thread for this sort of sewing, that stuff is great for my woven fabrics. 


Another interesting thing to note, the elastic to use in the waist of a pair of tights. I've tried both non-roll and  knit... I have a great affinity for the knit one-- it's very soft, more stretchy and moves much more comfortably than the stiffer non-roll elastic.


My husband was super sweet and took a couple photos of me in action.  I wore the pink one hiking last weekend... it was so nice to have the mitts when the sun was starting to go down below the tree line.  The photo on the right is moments after my New Year's Day 5k around my neighborhood.  Don't look too close, I was a little sweaty.  And P.S. I was at a New Balance store earlier today-- one long sleeved running top comparable to mine cost *more* than all the yards of fabric I got to make my own!  Yeah, seriously.  And it was very likely the same fabric. 


~Kathy 

Comments

  1. I always think about doing stretch piping like this when I'm doing active wear, then I always forget! After, I've sewn together a few pieces, I remember. By then, there is no way, I'm ripping out seams and cutting strips of piping!!!

    ReplyDelete
  2. Love all of these! Thanks for the tip on the thread and the elastic. The piping is a really nice touch!

    ReplyDelete
  3. Love this post! I've always wanted to make workout pants, I tried once with a regular leggings pattern and it was a total fail. All your gear looks so lovely. Thanks for sharing.

    ReplyDelete
  4. Oooh. Thank you thank you thank you for this post! I have some amazing active wear fabric from Fabric Mart that I received in a bundle and really want to try making some cozy comfy pants, and I love all the tricks and ideas you have here.

    And, yeah, I am impressed that swimwear fabric can work for running pants. :-) (That is how I exercise, btw, I swim, so I see that fabric and think suit, I love the outside of the box thinking on your part!)

    ReplyDelete
  5. Love all of them! I think I'm going to make a fully citron top, it's such a fun color, and yes, this fabric is super super soft. Glad to read it holds up after a few washes.

    ReplyDelete
  6. Did you get the pattern (from Papercut Patterns) as a download or by mail and if by mail, how long did it take to receive it? And how difficult were the pants to make? Thanks for some inspiration!

    ReplyDelete
    Replies
    1. Sorry for the super slow response!! Yes, I did get the paper version by mail. I've had it for a couple years (about that?) and feel like it took about a week and a half to get to me in the US here in Maryland.

      Delete
  7. I was just wondering where you use the Maxi-Lock Stretch thread on your serger. Do you use it just in the upper and lower loopers or in the needles too? I would think coverage from the upper and lower loopers would eliminate any chaffing to the skin. TIA for your advice.

    ReplyDelete
    Replies
    1. Judy-- I use the Maxi Lock Stretch thread in all four loopers on my serger. Regular polyester thread has no stretch at all while the maxi lock stuff will allow for more comfortable movement as well as comfort against the skin. I've made activewear in the past with just the regular cone thread and it feels a little more "tight" in a way, it's just a thing I can feel as I move. You can experiment and see what you prefer for sure.

      Delete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: A Wardrobe Staple for Spring - A Denim Coat

Hello Sewing Friends! It’s Sharon with Sharon Sews with my latest Fabricista make – a denim coat  for spring.  Denim is a wardrobe staple for many of us, and even more so this year with denim on denim looks coming back in style.  The denim I used is a medium weight cotton/lycra blend with about a 20% stretch selvage to selvage.  Fabric Mart always does an amazing job photographing and describing their fabrics, yet I still gasped in delight when I opened the package containing my denim.  It was even better than I had anticipated. This fabric would have worked well for a traditional denim jacket – one with button front closure, chest pockets with flaps, and a collar.   However, I have wanted to sew this open front coat with kimono inspired sleeves and big patch pockets since February 2021.  I saw it in that month’s  BurdaStyle Magazine, bookmarked the page, and promptly forgot about the coat.  It’s coat #105 if you’re interested in sewing one for yourself. Fortunately, I went on an organ

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month!  This year is the year I challenge my sewing skills.   I have wanted a moto jacket for some time.  Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one.  The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting.    Remember when I said I wanted to challenge my sewing skills?  😉 This fabric was beautiful but fragile to work with.  It was a great mental challenge that had me problem solving before sewing to avoid any potential problems.  I first traced out the pattern onto tissue paper to determine the fit.   I used scrap cotton fabric to sew up a “practice run” of the jacket.    I was pleasantly surprised at how easily the jacket comes together.   I sewed up the muslin in one evening.  It was time to cut into the beautifu

Made By A Fabricista: My Version of the Infamous DVF Wrap Dress

Just in case you are not aware, the iconic Diane Fustenberg wrap dress has turned 50 this year.  In celebration, Vogue has re-released the DVF Wrap Dress pattern, which now comes in extended sizes.  This dress is so classic and fits many different body types.  I got a hold of this pattern and decided this would be my birthday dress this year. This pattern is categorized as a Very Easy Vogue pattern, and I would have to agree with that. Wrap dresses are usually relatively simple to put together since there aren’t that many pattern pieces to sew together. I made View A in a size 22 and the only modification I made was to shorten the hem by 6 inches.  I will say that since I used a Ponte Knit , I could have gone down to a size 20.  I didn’t read the fabric suggestions before picking my fabric.  I’ve always remembered seeing the DVF Wrap dress in knits. After reviewing the fabric suggestions, they do say that you can use soft fabrics, like a Challis or a Chambray. As I mentioned, I’ve alwa