Skip to main content

Designer Hack: Thakoon Flocked Sweatshirt

I love when we get designer fabrics. I love it for a few reasons --
1) I love the photo hunt to see what the designer made with it.
2) I love the excitement that the customers get.
3) I love trying to figure out how to use a fabric when it is unusual, such as a panel or border.
4) I love saying that, "This fabric is from XYZ designer and I made my own version of the garment!"


We recently imported a load of fabric from Thakoon. I had heard of Thakoon, but was not too familiar with his designs. Thakoon is Thai-American and grew up in Omaha, Nebraska. His designs are described as "timelessly feminine" and "romantic and sensual as they are modern and innovative. (Thanks to Wikipedia for that info.) His designs have been worn by numerous celebrities and carry a high price tag.

I was intrigued by this cotton sweatshirt knit with a flocked floral design. It is a panel and honestly, at first glance, didn't seem to have a great layout. The flowers are about 24" inches apart, not leaving you with a lot of room to cut something without getting another flower in the pattern piece.

I browsed images found under "Thakoon sweatshirt" on Google, and don't you know, I found it! The original sweatshirt design has a dropped shoulder, back opening with a contrasting insert and piecing that skews the flocked design. I really liked the skewed piece work -- it helped break up this romantic floral and made it edgier.


One thing I didn't like about it was the boxiness. I am not tall and skinny. Boxy tops, especially in heavier fabrics, do not look good on me. I look like a box on sticks. You'll see how I reworked that in a minute.

I decided to go with a TNT pattern for me -- Pamela's Patterns Perfect T-Shirt. (If you remember, in the summer of 2016, we hosted a series of t-shirt pattern hacks.) I normally use the darted front with this pattern, but didn't want to mess up the flocked flower with a dart, so I went with the regular front piece.



To start off this project, I had to figure out how they cut everything out. It looks like two flocked pieces were used. I had 3 panels to play with and would recommend you buy the same amount if you want to do this project. You won't use all of it, but you need 3 panels for the length of the shirt. Panels are cut in between the two flowers. The fabric is available HERE.

I started with the front piece and laid it so the flocked flower was in the torso area. The shoulder area ended up really close to the flocked flower above it. I traced one side of the shirt, then laid the pattern piece down to create the second half. When I traced the pattern, I made it less curvy and a bit wider at the base. I wanted a looser fit than my normal t-shirts.

If you look close at the original design, there is a seam going down the right front side of the shirt. To create that, I traced the neckline and half the shoulder seam. Then I shifted the entire pattern piece over to create about 1/2" extra width from the shoulder to the hem. That way, I could just fold it, sew it and get back to the original size of the pattern. (I didn't fold and sew though until I skewed the hem piece.)

Here you can see I have everything cut out, except for the one side. I needed to leave enough fabric so that when I cut the bottom half where the skewed piece will be, that there was enough fabric.


Time to start cutting up this shirt! I measured 8 1/2" from the hemline and marked. This is where I then cut across the shirt to skew the bottom.

I moved the bottom piece over about 5 1/2" inches, skewing the flower.

End result: 

Then I sewed them back together and cut off the excess on each side. Remember the vertical seam? I sewed that in after this step was finished.

Back Piece: 
I actually didn't realize that the back on the original was opened when I started. (Can you tell I was figuring it out as I go??) I really liked this idea, so I took the back pieces and found a good spot on the fabric for them. One half I kept solid. The other half I positioned the flocked flower. I had it coming off the edge for interest. The shoulder area also caught a piece of a flower! I added length to the back pieces and graded them to the length of the front to get a high-low hem.

To create an open back, I added 1" to the center back pieces for finishing.



I fused SewkeysE 1" Fusible Knit Stay Tape to the wrong side of the center back seams to stabilize it and help it from winging out when I wear it. After the back seam was finished, I basted at the neckline to create one piece.


Sleeves:
I used the long sleeve pattern for this design. I cut out one sleeve without any flocking. I carefully placed the other sleeve so that an entire flower would be shown. I placed it so the flower would show more from the front. (Look at your sleeve cap markings to make sure you have the flower closer to the front vs. the back if you decide this same design detail.) I used the sleeve without flocking as my pattern because I widened it for a looser fit.


The original had a seam skewed at the sleeve. In the photo above, I am testing to see where I would like the seam break to be. I marked 4 1/4" and cut. Be sure you leave extra on one of the sides of the cut piece so that when you skew it you have enough fabric to have a full sleeve. (Similar concept to the front of the shirt.)

I sewed the rest of the shirt just like the pattern states and voila! I have my very own designer sweatshirt! (I have to say, I like my version better. Hehe **The perks of sewing for yourself**)

I top-stitched the back pieces together till about the waistline. I will need to wear a cami underneath because it stops just above my pant waist line. You could put a panel of some sort in it, but I chose not to.

Something to think about as you make this -- balance your design. I chose to have the flower on the back left and the right sleeve to balance it out. If I chose to have everything on one side, it would have been off balanced-- it would have bothered me! (OCD!)



Another thing to keep in mind is that there is more than one way to do it! You could place it differently. Depending on your size, you may need to. I find that if you size large or smaller, you will be ok. If you are plus size, you may have to do more tweaking or buy an extra panel just in case.

I hope you were inspired by my designer hack. It was a lot of fun to make. I'd love to see your designer hacks. Share them with on Facebook and tag us on Instagram @fabricmart.

Happy Sewing!
~ Julie

PS-- See our other fabrics from Thakoon HERE.

Comments

  1. Clearly, I need to check out more of Thakoon being from Omaha myself! :) What a cool sweatshirt! You did a great job making the original style fit you. This fabric looks cool with the shifted motifs; that's a really innovative way to work with a floral.

    ReplyDelete
  2. wow. I love it! very creative and you look great in it.

    ReplyDelete
  3. Thanks for using the Perfect T-Shirt pattern from my pattern line. I agree, I like your version better than the Thakoon original! It looks fabulous!

    ReplyDelete
    Replies
    1. Thank you, Pamela! Your t-shirt does great again!

      Delete
  4. Great detective work and a great knock-off! Nice job, Julie!

    ReplyDelete
  5. I also Google a designer after buying their fabric to see what they used it for. Really cool sweatshirt. I definitely like your version better than the original.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Fall Capsule Wardrobe with Pattern Emporium

Hello fellow fabric lovers! At long last the very best of all seasons has commenced and I'm ready to embrace the impending chill. When Fabric Mart held their sale for 65% off knits (!) I had a ridiculously fun time curating a little collection for myself to sew into a wardrobe that would be perfect for both warm and cool days since fall likes to tease with temperature changes. Can you even believe this whole stack (and thread!!) came in just under $50?! Mind blown. I wear a lot of light wovens in summer to keep cool, and switching to more cozier knits really marks a welcome change in my wardrobe.  There are many designers I simply adore, but the reason I chose Pattern Emporium's patterns for this project is because the garments are already created to pair well with many other designs in the collection. Since I've previously sewn all of these particular items and own just about the entire expanse of PE's patterns, this was a relatively easy decision and I had no doubts a

Made By A Fabricista: A Designer-Inspired Jacket in an Embroidered Silk Suiting

Hello my sewing friends!   When September rolls around many of us look forward to wearing cozy sweaters while sipping pumpkin spice lattes. However, I live in a warm ­weather state – umm, scratch that – I live in a hot weather state, and I wear layering pieces rather than cozy sweaters. Like this jacket! Vogue 1831 is a Gucci-inspired jacket pattern that was released a few months ago. The fully lined jacket looks like a basic jacket from the front, but turn around and you’ll find an inverted pleat with an adorable bow detail! I wanted to sew this jacket to wear with jeans and when I saw this embroidered silk suiting, I knew I’d found my fabric. There is a gold metallic swirl embroidered into the fabric that glitters slightly when the light hits those threads.  Trust me, the photos don’t capture the beauty of this fabric. Although this fabric was listed as dry-clean, I preshrunk it in the machine using a gentle cycle with a cold wash and cold rinse.  I placed it in the dryer on low heat

Made By A Fabricista: Chanel Inspired Boucle Jacket

I've always admired the iconic look of a Chanel Boucle Suit Jacket. The Chanel Jacket style is versatile and classic. Over its rich 100-year life span, the jacket has appeared with collars, zippers, buttons, pockets, trim, fringe, and many other variations. It is worn by everyone from movie stars, royalty, first ladies, and just everyday women. Why? Because the luxurious silhouette, boucle fabric, and tailored fit look great on everyone! Having admired the Chanel Boucle Suit Jacket for most of my life, I set out to acquire one. After a few Google searches for Chanel jackets and a glaringly steep $6,000 price tag (believe it or not, that was for pre-owned Chanel.) I knew the only way I'd ever wear a jacket like that is if I made one. Enter in $50 of fabric from Fabric Mart, $30 in notions, a $10 sewing pattern, and my Chanel dreams could become a reality.  I started my Chanel look-a-like jacket by researching sewing patterns that would help me capture that iconic look. I wanted