Skip to main content

Designer Hack: Thakoon Flocked Sweatshirt

I love when we get designer fabrics. I love it for a few reasons --
1) I love the photo hunt to see what the designer made with it.
2) I love the excitement that the customers get.
3) I love trying to figure out how to use a fabric when it is unusual, such as a panel or border.
4) I love saying that, "This fabric is from XYZ designer and I made my own version of the garment!"


We recently imported a load of fabric from Thakoon. I had heard of Thakoon, but was not too familiar with his designs. Thakoon is Thai-American and grew up in Omaha, Nebraska. His designs are described as "timelessly feminine" and "romantic and sensual as they are modern and innovative. (Thanks to Wikipedia for that info.) His designs have been worn by numerous celebrities and carry a high price tag.

I was intrigued by this cotton sweatshirt knit with a flocked floral design. It is a panel and honestly, at first glance, didn't seem to have a great layout. The flowers are about 24" inches apart, not leaving you with a lot of room to cut something without getting another flower in the pattern piece.

I browsed images found under "Thakoon sweatshirt" on Google, and don't you know, I found it! The original sweatshirt design has a dropped shoulder, back opening with a contrasting insert and piecing that skews the flocked design. I really liked the skewed piece work -- it helped break up this romantic floral and made it edgier.


One thing I didn't like about it was the boxiness. I am not tall and skinny. Boxy tops, especially in heavier fabrics, do not look good on me. I look like a box on sticks. You'll see how I reworked that in a minute.

I decided to go with a TNT pattern for me -- Pamela's Patterns Perfect T-Shirt. (If you remember, in the summer of 2016, we hosted a series of t-shirt pattern hacks.) I normally use the darted front with this pattern, but didn't want to mess up the flocked flower with a dart, so I went with the regular front piece.



To start off this project, I had to figure out how they cut everything out. It looks like two flocked pieces were used. I had 3 panels to play with and would recommend you buy the same amount if you want to do this project. You won't use all of it, but you need 3 panels for the length of the shirt. Panels are cut in between the two flowers. The fabric is available HERE.

I started with the front piece and laid it so the flocked flower was in the torso area. The shoulder area ended up really close to the flocked flower above it. I traced one side of the shirt, then laid the pattern piece down to create the second half. When I traced the pattern, I made it less curvy and a bit wider at the base. I wanted a looser fit than my normal t-shirts.

If you look close at the original design, there is a seam going down the right front side of the shirt. To create that, I traced the neckline and half the shoulder seam. Then I shifted the entire pattern piece over to create about 1/2" extra width from the shoulder to the hem. That way, I could just fold it, sew it and get back to the original size of the pattern. (I didn't fold and sew though until I skewed the hem piece.)

Here you can see I have everything cut out, except for the one side. I needed to leave enough fabric so that when I cut the bottom half where the skewed piece will be, that there was enough fabric.


Time to start cutting up this shirt! I measured 8 1/2" from the hemline and marked. This is where I then cut across the shirt to skew the bottom.

I moved the bottom piece over about 5 1/2" inches, skewing the flower.

End result: 

Then I sewed them back together and cut off the excess on each side. Remember the vertical seam? I sewed that in after this step was finished.

Back Piece: 
I actually didn't realize that the back on the original was opened when I started. (Can you tell I was figuring it out as I go??) I really liked this idea, so I took the back pieces and found a good spot on the fabric for them. One half I kept solid. The other half I positioned the flocked flower. I had it coming off the edge for interest. The shoulder area also caught a piece of a flower! I added length to the back pieces and graded them to the length of the front to get a high-low hem.

To create an open back, I added 1" to the center back pieces for finishing.



I fused SewkeysE 1" Fusible Knit Stay Tape to the wrong side of the center back seams to stabilize it and help it from winging out when I wear it. After the back seam was finished, I basted at the neckline to create one piece.


Sleeves:
I used the long sleeve pattern for this design. I cut out one sleeve without any flocking. I carefully placed the other sleeve so that an entire flower would be shown. I placed it so the flower would show more from the front. (Look at your sleeve cap markings to make sure you have the flower closer to the front vs. the back if you decide this same design detail.) I used the sleeve without flocking as my pattern because I widened it for a looser fit.


The original had a seam skewed at the sleeve. In the photo above, I am testing to see where I would like the seam break to be. I marked 4 1/4" and cut. Be sure you leave extra on one of the sides of the cut piece so that when you skew it you have enough fabric to have a full sleeve. (Similar concept to the front of the shirt.)

I sewed the rest of the shirt just like the pattern states and voila! I have my very own designer sweatshirt! (I have to say, I like my version better. Hehe **The perks of sewing for yourself**)

I top-stitched the back pieces together till about the waistline. I will need to wear a cami underneath because it stops just above my pant waist line. You could put a panel of some sort in it, but I chose not to.

Something to think about as you make this -- balance your design. I chose to have the flower on the back left and the right sleeve to balance it out. If I chose to have everything on one side, it would have been off balanced-- it would have bothered me! (OCD!)



Another thing to keep in mind is that there is more than one way to do it! You could place it differently. Depending on your size, you may need to. I find that if you size large or smaller, you will be ok. If you are plus size, you may have to do more tweaking or buy an extra panel just in case.

I hope you were inspired by my designer hack. It was a lot of fun to make. I'd love to see your designer hacks. Share them with on Facebook and tag us on Instagram @fabricmart.

Happy Sewing!
~ Julie

PS-- See our other fabrics from Thakoon HERE.

Comments

  1. Clearly, I need to check out more of Thakoon being from Omaha myself! :) What a cool sweatshirt! You did a great job making the original style fit you. This fabric looks cool with the shifted motifs; that's a really innovative way to work with a floral.

    ReplyDelete
  2. wow. I love it! very creative and you look great in it.

    ReplyDelete
  3. Thanks for using the Perfect T-Shirt pattern from my pattern line. I agree, I like your version better than the Thakoon original! It looks fabulous!

    ReplyDelete
    Replies
    1. Thank you, Pamela! Your t-shirt does great again!

      Delete
  4. Great detective work and a great knock-off! Nice job, Julie!

    ReplyDelete
  5. I also Google a designer after buying their fabric to see what they used it for. Really cool sweatshirt. I definitely like your version better than the original.

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Summery Chambray Linen Mini Capsule

Hello all! With summer on the horizon, I'm gearing up for the heat with some fabrics and styles to carry me through weekend trips and general running around in hot weather. No matter the temperature, I still aim to appear stylish and put together, at least, you know, most of the time. Fabric Mart's exclusive linen chambray is superb for this exact use! I requested two colors of the glorious lightweight yarn-dyed linen chambray. Putty is a cool-toned light gray that leans toward purple and taupe tones and the Medium Sky Blue is perhaps a little more self-explanatory. I have sewn with this base before, and I was just as delighted and impressed with these two colors as I have been in the past. I can't recommend them more, these are quite lightweight and very finely woven. They are sturdy with a very smooth face and have some body, but still maintain nice drape for linen. Despite being lightweight, they have enough structure to support the rounded curves of the pant seams an

Made By A Fabricista: Rayon Challis Separates for Me!

This month I decided to take a minute to sew something for myself! Knowing that I was about to move house (I'm excited to be getting a nice big sewing room!), I opted to use some tried-and-true patterns that I knew would be quick and easy to sew: Jalie Michelle and Jalie Geneviève . I've really loved seeing garments made in crinkle challis lately, so I selected a solid mustard yellow crinkle challis with a plan for either pants or a skirt ( Geneviève is a skirt, but there's also a culotte option available for it), and two sateen challis prints for a top (Michelle can be made either as a top or a dress). I considered making a reversible top with both fabric prints, but upon playing with them in real life, opted for two separate tops with a facing. Given that challis tends to be a bit shifty, it's best to starch it before you begin cutting out your project. It's also best to cut it out on a large surface with a rotary cutter so the fabric doesn't get distorted.

Made By A Fabricista: A Mother’s Day Gift - Making my Daughter’s Prom Dress

Happy Friday All! As a mother and sewist, I am always planning months in advance for any special occasion dress. Due to the pandemic, my daughter missed all the activities at the end of her elementary journey and I was truly heart broken. She did not have any promotional ceremony, field trips or activities for the last few months of elementary school. I made a vow to myself that in Middle School, no matter what life throws us, I would make the perfect Junior Prom dinner dance dress even if she had to twirl in it at home. When I came across this beautiful blue lycra sequins fabric, I was thrilled. My daughter Arielle and I spoke a few months ago about the perfect Grade 8 Junior Prom dinner dance dress. She found an inspirational photo on Pinterest back in December which was a one shoulder maxi dress that sparkles and she was excited about me making her special dress. At the time she wasn’t quite sure of the shade of blue she wanted but after our trip to Jamaica during Spring break, she