Made by a Fabricista: All about the seams.

Did you think I was done with chartreuse? Well...I'm not! I decided to add another level of gray and chartreuse to the suit I made back in December (see here).

As soon as I saw this wool and cashmere double faced coating by Michael Kors I knew I had to have it. It was offered in several color combos, but quite a few are sold out. Check out the available colors and all the other amazing coating fabrics here. When it arrived I was blown away, not just by the colors (which I already knew I loved), but by the softness of the brushed finish. It's divine!

Since this wool is double faced I knew I had to make something that would show both sides. I initially thought of a belted cape, like McCalls 6209, but ultimately decided on Butterick 6244. Not only does the waterfall collar show both sides, but thanks to the flat felled seams it is also reversible.

It you haven't sewn flat felled seams it's surprisingly simple, if a bit time consuming. I will note that it is a bit trickier on heavier materials (like this wool). Start by sewing your seam as usual then follow the steps below.

Trim one side of the seam allowance to 1/4"
Fold the longer seam allowance over the trimmed side to the seam stitching
Fold over encasing the trimmed seam allowance
Edgestitch the seam
Finished flat seam

The only seam in this pattern that doesn't call for flat felled seams is the armsyce. Here (as well as the underarm seam simply because I couldn't figure out how to do a flat felled seam there) I opted for a french seams. A French seam is also rather simple, though they might take a tad bit of thinking ahead. For French seams you start by sewing the wrong sides together. This feels weird and I had to think twice on this project as the fabric is double faced. See the steps below.

Sew wrong sides together with a little less than have the called for seam allowance (here about 1/4" due to the 5/8" seam). Press the seam
Flip the seam so that the right sides are together.
Pin and sew the seam with a slightly larger that half of the seam allowance 3/8" (or just enough to encase the raw edges from the other side.)
Now there is a clean seam on the right side and a encased seam on the wrong side.

*Optional: You could edgestitch this seam and it would look similar to the flat felled.

I find the French seam easier to sew as it eliminates the cutting step, but both have their uses. Are you meticulous about your inside finishings? What's your favorite seam finish?

See you next month!

Tiffany
TipStitched.com

Made by a Fabricista: A Wardrobe Staple for Spring - A Denim Coat

Hello Sewing Friends! It’s Sharon with Sharon Sews with my latest Fabricista make – a denim coat for spring. Denim is a wardrobe staple for many of us, and even more so this year with denim on denim looks coming back in style. The denim I used is a medium weight cotton/lycra blend with about a 20% stretch selvage to selvage. Fabric Mart always does an amazing job photographing and describing their fabrics, yet I still gasped in delight when I opened the package containing my denim. It was even better than I had anticipated. This fabric would have worked well for a traditional denim jacket – one with button front closure, chest pockets with flaps, and a collar. However, I have wanted to sew this open front coat with kimono inspired sleeves and big patch pockets since February 2021. I saw it in that month’s BurdaStyle Magazine, bookmarked the page, and promptly forgot about the coat. It’s coat #105 if you’re interested in sewing one for yourself. Fortunately, I went on an organ

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month! This year is the year I challenge my sewing skills. I have wanted a moto jacket for some time. Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one. The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting. Remember when I said I wanted to challenge my sewing skills? 😉 This fabric was beautiful but fragile to work with. It was a great mental challenge that had me problem solving before sewing to avoid any potential problems. I first traced out the pattern onto tissue paper to determine the fit. I used scrap cotton fabric to sew up a “practice run” of the jacket. I was pleasantly surprised at how easily the jacket comes together. I sewed up the muslin in one evening. It was time to cut into the beautifu

Made By A Fabricista: My Version of the Infamous DVF Wrap Dress

Just in case you are not aware, the iconic Diane Fustenberg wrap dress has turned 50 this year. In celebration, Vogue has re-released the DVF Wrap Dress pattern, which now comes in extended sizes. This dress is so classic and fits many different body types. I got a hold of this pattern and decided this would be my birthday dress this year. This pattern is categorized as a Very Easy Vogue pattern, and I would have to agree with that. Wrap dresses are usually relatively simple to put together since there aren’t that many pattern pieces to sew together. I made View A in a size 22 and the only modification I made was to shorten the hem by 6 inches. I will say that since I used a Ponte Knit , I could have gone down to a size 20. I didn’t read the fabric suggestions before picking my fabric. I’ve always remembered seeing the DVF Wrap dress in knits. After reviewing the fabric suggestions, they do say that you can use soft fabrics, like a Challis or a Chambray. As I mentioned, I’ve alwa

Fabric Mart Fabricistas

Search This Blog