Made By A Fabricista: Velvet for the Holidays

Are you getting ready for the holidays? I am. From past years, it gets so busy in my household around this time of year, so it is never too early to start my holiday sewing. This year I decided to sew velvet, a fabric I had not sewn for many years but I think it is luxurious.

As luck would have it, FM’s poly rich black velvet flashed on my computer screen and I bought lots. I thought it would be pretty for a one-shoulder gown, which I had never worn before but admired on others. The following week FM’s multi-colored one showed up. It was a poly embossed Bohemian print velvet with jade, yellowish, and crimson colors; it screamed fall and family get-togethers. I just had to have it! When the fabrics arrived, the deep colors did not disappoint.

I chose Butterick B6557 for both dresses, View B for the knee-length printed dress and View C for the maxi dress. It was perfect for velvets; the front was one whole piece and so was the back. I cut the fabrics with the nap going down. From my muslin, I cut a size 16. Pattern weights and silk pins really helped anchor the fabrics. Lining is a must and so is an invisible zipper. I did not prewash the fabrics since the finished dresses will be dry cleaned.

To sew the dresses, I used a walking foot, a Teflon foot, an invisible zipper foot, and microtex needle. I tested my stitches and tension on fabric scraps first as velvet tends to slip a bit. Also, these velvets sewed differently from each other. The pattern instructions were clear. I took a chance at making close fitting dresses from velvet and am pleased with the fit. After hanging the dresses for 24 hours, I hemmed them by hand.

Modifications: I shortened the bodice darts by one inch on each end for more room. Because I could not use fusible interfacing on velvet, I used a grosgrain ribbon on the neckline instead. This would ensure the one- shoulder neckline did not roll down. For the shorter dress, I added black lace trim to the sleeves.

I am very happy with my first one-shoulder dresses. I am ready for the holidays – the multi-colored one for Thanksgiving and Christmas gatherings and the long one for formal events, including new year’s celebrations.

All the best for your holiday sewing,

MARY ANN | @anasewperfect

Unfortunately Fabric Mart Fabrics sell out quickly!
You can find similar fabrics by shopping the following categories VELVET.

Made by a Fabricista: A Wardrobe Staple for Spring - A Denim Coat

Hello Sewing Friends! It’s Sharon with Sharon Sews with my latest Fabricista make – a denim coat for spring. Denim is a wardrobe staple for many of us, and even more so this year with denim on denim looks coming back in style. The denim I used is a medium weight cotton/lycra blend with about a 20% stretch selvage to selvage. Fabric Mart always does an amazing job photographing and describing their fabrics, yet I still gasped in delight when I opened the package containing my denim. It was even better than I had anticipated. This fabric would have worked well for a traditional denim jacket – one with button front closure, chest pockets with flaps, and a collar. However, I have wanted to sew this open front coat with kimono inspired sleeves and big patch pockets since February 2021. I saw it in that month’s BurdaStyle Magazine, bookmarked the page, and promptly forgot about the coat. It’s coat #105 if you’re interested in sewing one for yourself. Fortunately, I went on an organ

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month! This year is the year I challenge my sewing skills. I have wanted a moto jacket for some time. Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one. The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting. Remember when I said I wanted to challenge my sewing skills? 😉 This fabric was beautiful but fragile to work with. It was a great mental challenge that had me problem solving before sewing to avoid any potential problems. I first traced out the pattern onto tissue paper to determine the fit. I used scrap cotton fabric to sew up a “practice run” of the jacket. I was pleasantly surprised at how easily the jacket comes together. I sewed up the muslin in one evening. It was time to cut into the beautifu

Made By A Fabricista: My Version of the Infamous DVF Wrap Dress

Just in case you are not aware, the iconic Diane Fustenberg wrap dress has turned 50 this year. In celebration, Vogue has re-released the DVF Wrap Dress pattern, which now comes in extended sizes. This dress is so classic and fits many different body types. I got a hold of this pattern and decided this would be my birthday dress this year. This pattern is categorized as a Very Easy Vogue pattern, and I would have to agree with that. Wrap dresses are usually relatively simple to put together since there aren’t that many pattern pieces to sew together. I made View A in a size 22 and the only modification I made was to shorten the hem by 6 inches. I will say that since I used a Ponte Knit , I could have gone down to a size 20. I didn’t read the fabric suggestions before picking my fabric. I’ve always remembered seeing the DVF Wrap dress in knits. After reviewing the fabric suggestions, they do say that you can use soft fabrics, like a Challis or a Chambray. As I mentioned, I’ve alwa

Fabric Mart Fabricistas

Search This Blog