Skip to main content

Reader's Pick Sew Along #2 - Bodice Pleats

On Monday when I introduced Step #1 - Cutting, Alterations and Thread, I mentioned about lengthening and shortening the bodice piece. Since then, the person that asked about this tried it out, using the directions from Handmade by Heather B, and it worked! So if you haven't cut out of your good fabric yet and need to do this step, give it a try!

Since we are working with knits, it is important to make sure you have a STRETCH NEEDLE. One thing I found when I was starting to sew with knits, was that my seams and hems would break because there was no give. Knits stretch with you, the thread does not. Some sewing machines have a knit stitch. (Check your manual for this info.) If your sewing machine doesn't, set your machine to a straight stitch, but modify your zig-zag stitch ever so slightly. (Or use the zig-zag, but on a very fine zig-zag, almost straight! This setting depends on your sewing machine.) I have a Bernina and it comes with a knit stitch. I don't care for it, so I use a straight stitch with a slight zig-zag. 

Here is a photo of my settings: 

I do tug slightly on a knit when I'm sewing with it, but not too much. You don't want fabric ripples!

So today we're going to make the pleats for the bodice. I'm not going to go through every step they tell you to do, because that would just be repetitive, but give you hints, reminders and suggestions that go along with the step. 

When making your pleats you may fumble around with matching up your lines and sticking the pins into place. Starting from the end of the fabric, I pierce the pin through the line and then through the line on the other side of the fabric. This ensures that you've got one section all lined up. Then go back into the line with the pin and match up the line again. 



When sewing your pleats, be sure to keep the other pleats out of the way! You don't want to sew them all together! 

Listen to the directions with they say press and baste your pleats up or down! It definitely helps the dress look great in the finished product!  


 After your pleats are in place, use some seam binding to stabilize your shoulder seam. I used a transparent seam tape called, Seams Great Binding by Dritz.


That's all for today! This step was easy. The next couple of steps get more complicated. 

Share your fabric choices on our Flickr page! Some of you have shown us what you are using and we'd love to see more! 

Any questions or suggestions? Comment below. 

Comments

  1. Thanks for the great info. :) I want to add that I definitely stabilized the neckline bit, too, so that it wouldn't stretch out of shape when sewing it up. My muslin is far from perfect, but that darn neckline looked great. I *think* I may have used stay tape...

    When is the next part of the sew along set to go? I want to make sure I stay in step with you all and don't get behind. I have a few projects over the next few weeks, so I have to prioritize my sewing tasks.

    ReplyDelete
    Replies
    1. Hi Dina, the next step will be posted on Friday. You will have all weekend to work on that. And for people catching up, they have the weekend to do also!

      Delete
  2. No wait, the neckline has stretch, so I must have used some kind of knit stabilizer. Will check my notes and dress muslin a bit further to see what I did to stabilize the neckline...

    ReplyDelete
  3. Okay, last comment, I promise. I just checked the neckline, and it appears I didn't use a stay tape or stabilizer of any kind. Sigh. What I think I did was staystitch the dress neckline to prevent stretching, but then used the "lightning bolt" stitch on my Bernina to get stretch on the finished bit of the neckline.

    I only remember this part so clearly because so many reviews of this pattern mention making sure to not stretch out the neckline or else it will gape. And that is the last thing I wanted from my finished product.

    ReplyDelete
    Replies
    1. I did notice the neckline comment brought up a lot in other reviews of this pattern. We will talk about this in the next step, which will be posted on friday!

      Delete
  4. How do you feel about using clear elastic on the shoulder seams instead of stabilizer? I've used it and like it, but are there times stabilizer would be preferable?
    Thanx!

    ReplyDelete
    Replies
    1. Hi Sharon,

      I think that clear elastic would be fine, as long as you don't pull on it to the point of puckering your seam. If you are comfortable with it, I would say go for it! The thing I liked about the seam tape I used was that it did not stretch, therefore I didn't have to worry that it would pucker.

      Delete
    2. That makes sense. Thanks for the reply!

      Delete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made By A Fabricista: Fall Capsule Wardrobe with Pattern Emporium

Hello fellow fabric lovers! At long last the very best of all seasons has commenced and I'm ready to embrace the impending chill. When Fabric Mart held their sale for 65% off knits (!) I had a ridiculously fun time curating a little collection for myself to sew into a wardrobe that would be perfect for both warm and cool days since fall likes to tease with temperature changes. Can you even believe this whole stack (and thread!!) came in just under $50?! Mind blown. I wear a lot of light wovens in summer to keep cool, and switching to more cozier knits really marks a welcome change in my wardrobe.  There are many designers I simply adore, but the reason I chose Pattern Emporium's patterns for this project is because the garments are already created to pair well with many other designs in the collection. Since I've previously sewn all of these particular items and own just about the entire expanse of PE's patterns, this was a relatively easy decision and I had no doubts a

Made By A Fabricista: Chanel Inspired Boucle Jacket

I've always admired the iconic look of a Chanel Boucle Suit Jacket. The Chanel Jacket style is versatile and classic. Over its rich 100-year life span, the jacket has appeared with collars, zippers, buttons, pockets, trim, fringe, and many other variations. It is worn by everyone from movie stars, royalty, first ladies, and just everyday women. Why? Because the luxurious silhouette, boucle fabric, and tailored fit look great on everyone! Having admired the Chanel Boucle Suit Jacket for most of my life, I set out to acquire one. After a few Google searches for Chanel jackets and a glaringly steep $6,000 price tag (believe it or not, that was for pre-owned Chanel.) I knew the only way I'd ever wear a jacket like that is if I made one. Enter in $50 of fabric from Fabric Mart, $30 in notions, a $10 sewing pattern, and my Chanel dreams could become a reality.  I started my Chanel look-a-like jacket by researching sewing patterns that would help me capture that iconic look. I wanted

Made by a Fabricista: My Olive Green Tamarack

Hello everyone! I hope you all are having a great week! I am here to share my latest make, a Tamarack Jacket from Grainline Studio . This pattern has been out for a while. I am so late to the party, but better late than never, right? I am super happy how my Tamarack turned out! Are you ready? Let's go! Fabric Making an olive color jacket was one of the items on my wish list for a while. Unfortunately the quilted jacketing I used has sold out. When I saw this plaid flannel , I thought it would be pretty if I placed the red on the cuffs. I wanted the red to peek out when I fold over the cuffs. Pattern Alterations I used size 6, shortened 2" for the bodice, and shortened 1" from the sleeve. If I make it again, I would add 1" back to the sleeve. (I am 5'1")  That way, I can fold over cuffs, but I don't lose the length of the sleeves. Also, I would probably go with one size bigger to wear with more layers of clothes underneath. When I made the sample jacket,