Skip to main content

Reader's Pick Sew Along #2 - Bodice Pleats

Image
By
On Monday when I introduced Step #1 - Cutting, Alterations and Thread, I mentioned about lengthening and shortening the bodice piece. Since then, the person that asked about this tried it out, using the directions from Handmade by Heather B, and it worked! So if you haven't cut out of your good fabric yet and need to do this step, give it a try!

Since we are working with knits, it is important to make sure you have a STRETCH NEEDLE. One thing I found when I was starting to sew with knits, was that my seams and hems would break because there was no give. Knits stretch with you, the thread does not. Some sewing machines have a knit stitch. (Check your manual for this info.) If your sewing machine doesn't, set your machine to a straight stitch, but modify your zig-zag stitch ever so slightly. (Or use the zig-zag, but on a very fine zig-zag, almost straight! This setting depends on your sewing machine.) I have a Bernina and it comes with a knit stitch. I don't care for it, so I use a straight stitch with a slight zig-zag. 

Here is a photo of my settings: 

I do tug slightly on a knit when I'm sewing with it, but not too much. You don't want fabric ripples!

So today we're going to make the pleats for the bodice. I'm not going to go through every step they tell you to do, because that would just be repetitive, but give you hints, reminders and suggestions that go along with the step. 

When making your pleats you may fumble around with matching up your lines and sticking the pins into place. Starting from the end of the fabric, I pierce the pin through the line and then through the line on the other side of the fabric. This ensures that you've got one section all lined up. Then go back into the line with the pin and match up the line again. 



When sewing your pleats, be sure to keep the other pleats out of the way! You don't want to sew them all together! 

Listen to the directions with they say press and baste your pleats up or down! It definitely helps the dress look great in the finished product!  


 After your pleats are in place, use some seam binding to stabilize your shoulder seam. I used a transparent seam tape called, Seams Great Binding by Dritz.


That's all for today! This step was easy. The next couple of steps get more complicated. 

Share your fabric choices on our Flickr page! Some of you have shown us what you are using and we'd love to see more! 

Any questions or suggestions? Comment below. 

Comments

  1. dinagideonApril 9, 2014 at 10:49 AM

    Thanks for the great info. :) I want to add that I definitely stabilized the neckline bit, too, so that it wouldn't stretch out of shape when sewing it up. My muslin is far from perfect, but that darn neckline looked great. I *think* I may have used stay tape...

    When is the next part of the sew along set to go? I want to make sure I stay in step with you all and don't get behind. I have a few projects over the next few weeks, so I have to prioritize my sewing tasks.

    ReplyDelete
    Replies
    1. Fabric MartApril 9, 2014 at 10:02 PM

      Hi Dina, the next step will be posted on Friday. You will have all weekend to work on that. And for people catching up, they have the weekend to do also!

      Delete
  2. dinagideonApril 9, 2014 at 10:51 AM

    No wait, the neckline has stretch, so I must have used some kind of knit stabilizer. Will check my notes and dress muslin a bit further to see what I did to stabilize the neckline...

    ReplyDelete
  3. dinagideonApril 9, 2014 at 11:08 AM

    Okay, last comment, I promise. I just checked the neckline, and it appears I didn't use a stay tape or stabilizer of any kind. Sigh. What I think I did was staystitch the dress neckline to prevent stretching, but then used the "lightning bolt" stitch on my Bernina to get stretch on the finished bit of the neckline.

    I only remember this part so clearly because so many reviews of this pattern mention making sure to not stretch out the neckline or else it will gape. And that is the last thing I wanted from my finished product.

    ReplyDelete
    Replies
    1. Fabric MartApril 10, 2014 at 9:19 AM

      I did notice the neckline comment brought up a lot in other reviews of this pattern. We will talk about this in the next step, which will be posted on friday!

      Delete
  4. Sharon G NicholsApril 9, 2014 at 10:35 PM

    How do you feel about using clear elastic on the shoulder seams instead of stabilizer? I've used it and like it, but are there times stabilizer would be preferable?
    Thanx!

    ReplyDelete
    Replies
    1. Fabric MartApril 10, 2014 at 9:16 AM

      Hi Sharon,

      I think that clear elastic would be fine, as long as you don't pull on it to the point of puckering your seam. If you are comfortable with it, I would say go for it! The thing I liked about the seam tape I used was that it did not stretch, therefore I didn't have to worry that it would pucker.

      Delete
    2. Sharon G NicholsApril 10, 2014 at 3:57 PM

      That makes sense. Thanks for the reply!

      Delete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: The Bernadette

By
Hello friends,  My Latest Fabricista Make: Friday pattern Co Bernadette Skirt x Midnight Navy Cotton/Lycra Sateen Stretch Denim Hi everyone, this is Byrd with my latest Fabricista make! When I saw Fabric Mart’s Muted Midnight Navy Cotton/Lycra Sateen Stretch Denim , I knew it would be perfect for my next project. The color is rich and versatile—a deep navy that works as a neutral but still has presence. The stretch denim has just the right balance: structure with a bit of give, making it great for a garment that needs both shape and comfort. It’s an ideal fabric for fall transitions, but it’s sturdy enough to carry straight into winter with tights and boots. For the pattern, I chose the Bernadette Skirt by Friday Pattern Company . This is one of their newer designs, and I knew immediately I wanted to sew it up. It’s a modern skirt that blends structure and style, with darts in the back and pleats in the front for a flattering fit. One of my favorite features is the belt, and of co...
6 comments
Continue Reading »

Made By A Fabricista: The Friday Pattern Company Westcliff Dress pattern

By
  Have I just sewn my new favorite Maxi dress for the Fall? Friday Pattern Company patterns are one of my favorite to sew and wear.  I have fun sewing up their patterns and they turn out so beautifully. The Westcliff is a top and dress pattern for knit lovers. I love wearing knit but sewing knit is not my favorite. The pattern features: A faux-wrap bodice with full coverage and a neckline designed not to gape! Two cup size options (B and D cup) for better bust fit.  A flowy A-line skirt, with an optional lower tier to convert it into a maxi. The pattern is written for knits with at least ~25% stretch.  I selected a very soft jersey knit from Fabric Mart that has large scale flowers in brown and pink. The instructions are clear, there are many helpful tips for sewing knit included. The faux-wrap style is flattering and relatively easy to wear, especially in a comfortable stretchy knit. Overall, for knit garment sewing, thi...
2 comments
Continue Reading »

Made By A Fabricista: One Pattern => Three Fabrics => Three Looks!

By
Hello sewing friends! Today I’m sharing three totally different looking tops I made from the same pattern where the only difference in approach was the fabric itself. If I hadn’t shared with you that these three tops were all made with similar options in same exact size…would you have known they all came from the same pattern? Read on, and let me know in the comments! First, the pattern – this is the Ellie & Mac Fall in Love sweater. I’ve had this pattern for ages and it’s been a tried and true for me over the years. I think the first time I sewed it up was back in 2018. It’s a great beginner pattern due to a few features:  1) Relaxed fit – it’s meant to be oversized so you don’t have to nail your exact measurements.  2) Not a ton of pattern pieces and limited options – it’s a basic sweater/sweatshirt so no wondering if you cut the right neckband for the right neckline 3) No hemming! If you sew the pattern as designed (which I did in one of the three options), it com...
2 comments
Continue Reading »