Skip to main content

Reader's Pick Sew Along #2 - Bodice Pleats

On Monday when I introduced Step #1 - Cutting, Alterations and Thread, I mentioned about lengthening and shortening the bodice piece. Since then, the person that asked about this tried it out, using the directions from Handmade by Heather B, and it worked! So if you haven't cut out of your good fabric yet and need to do this step, give it a try!

Since we are working with knits, it is important to make sure you have a STRETCH NEEDLE. One thing I found when I was starting to sew with knits, was that my seams and hems would break because there was no give. Knits stretch with you, the thread does not. Some sewing machines have a knit stitch. (Check your manual for this info.) If your sewing machine doesn't, set your machine to a straight stitch, but modify your zig-zag stitch ever so slightly. (Or use the zig-zag, but on a very fine zig-zag, almost straight! This setting depends on your sewing machine.) I have a Bernina and it comes with a knit stitch. I don't care for it, so I use a straight stitch with a slight zig-zag. 

Here is a photo of my settings: 

I do tug slightly on a knit when I'm sewing with it, but not too much. You don't want fabric ripples!

So today we're going to make the pleats for the bodice. I'm not going to go through every step they tell you to do, because that would just be repetitive, but give you hints, reminders and suggestions that go along with the step. 

When making your pleats you may fumble around with matching up your lines and sticking the pins into place. Starting from the end of the fabric, I pierce the pin through the line and then through the line on the other side of the fabric. This ensures that you've got one section all lined up. Then go back into the line with the pin and match up the line again. 



When sewing your pleats, be sure to keep the other pleats out of the way! You don't want to sew them all together! 

Listen to the directions with they say press and baste your pleats up or down! It definitely helps the dress look great in the finished product!  


 After your pleats are in place, use some seam binding to stabilize your shoulder seam. I used a transparent seam tape called, Seams Great Binding by Dritz.


That's all for today! This step was easy. The next couple of steps get more complicated. 

Share your fabric choices on our Flickr page! Some of you have shown us what you are using and we'd love to see more! 

Any questions or suggestions? Comment below. 

Comments

  1. Thanks for the great info. :) I want to add that I definitely stabilized the neckline bit, too, so that it wouldn't stretch out of shape when sewing it up. My muslin is far from perfect, but that darn neckline looked great. I *think* I may have used stay tape...

    When is the next part of the sew along set to go? I want to make sure I stay in step with you all and don't get behind. I have a few projects over the next few weeks, so I have to prioritize my sewing tasks.

    ReplyDelete
    Replies
    1. Hi Dina, the next step will be posted on Friday. You will have all weekend to work on that. And for people catching up, they have the weekend to do also!

      Delete
  2. No wait, the neckline has stretch, so I must have used some kind of knit stabilizer. Will check my notes and dress muslin a bit further to see what I did to stabilize the neckline...

    ReplyDelete
  3. Okay, last comment, I promise. I just checked the neckline, and it appears I didn't use a stay tape or stabilizer of any kind. Sigh. What I think I did was staystitch the dress neckline to prevent stretching, but then used the "lightning bolt" stitch on my Bernina to get stretch on the finished bit of the neckline.

    I only remember this part so clearly because so many reviews of this pattern mention making sure to not stretch out the neckline or else it will gape. And that is the last thing I wanted from my finished product.

    ReplyDelete
    Replies
    1. I did notice the neckline comment brought up a lot in other reviews of this pattern. We will talk about this in the next step, which will be posted on friday!

      Delete
  4. How do you feel about using clear elastic on the shoulder seams instead of stabilizer? I've used it and like it, but are there times stabilizer would be preferable?
    Thanx!

    ReplyDelete
    Replies
    1. Hi Sharon,

      I think that clear elastic would be fine, as long as you don't pull on it to the point of puckering your seam. If you are comfortable with it, I would say go for it! The thing I liked about the seam tape I used was that it did not stretch, therefore I didn't have to worry that it would pucker.

      Delete
    2. That makes sense. Thanks for the reply!

      Delete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: Preparing for the Holidays

Hard to believe the holidays are fast approaching and in six weeks we will welcome a new year!  I am determined to celebrate in a big way!!!   I picked Vogue V1722 by Designer Nicola Finetti for its statement bodice and statement sleeves. Yes, indeed, I am loving its close-fitting bodice, plunging neckline, balloon sleeves, and flared skirt.  I dared to make this special dress in Fabric Mart’s embroidered silk dupioni, a fabric I had not sewn before. I did not prewash the silk dupioni as dry cleaning will be my method of care for the finished garment. I underlined the bodice with prewashed black cotton batiste from my stash instead of the suggested interfacing. Though not called for by the pattern, I also underlined the skirt the same way to minimize wrinkling when I wear it. I prewashed black silk charmeuse (from Fabric Mart) to use as lining. Then I lined the balloon sleeves with champagne colored organza from my stash to give it more body. For the hem band, I used French fuse as int

Past Fabricista Guest Post: Classic Basic Pieces made with Ponte Knit

Happy Friday All! I am ecstatic to be guest blogging today and sharing a few basic pieces that I made.  I truly enjoy the creative process of sewing but writing a detail blog post has been quite challenging the past few months.  Hopefully after this one, I will find more time to document my creations as it helps going back and reading how I created the look.     I have been wanting to create a few basic pieces but kept procrastinating as it is often times cheaper to buy than make.  This summer, I have been truly disappointed with the quality of the tank tops in the department stores and I skipped buying them.  I have been eyeing the ponte knit section for a while on Fabric Mart to buy more colors to add to my stash.  When I saw the beautiful range of colors that were available a month ago with various shades of nude, I knew a few yards wouldn’t hurt my pocket.  I absolutely love the quality of ponte knit that is sold at Fabric mart, especially the rayon/nylon/lycra blend . I decided t

Made By A Fabricista: Winter Poncho

Hello Everyone, Today’s post is all about my new fall/winter layering piece: a poncho with tasseled hem. The Fabric. I selected a heavy weight wool/polyester chunky knit sweater. The fabric is a plaid print with colors perfect for the winter season. It has a one way stretch and nappy textured. The Pattern. I used McCalls 8241 for this project. It is a knit poncho with wide sleeve bands and options for turtleneck, crewneck, cropped, shaped or  tassle hems. I made view C without the turtleneck detail. I modified it by skipping the sleeves, it would have been too thick trying to sewing multiple layers. The Sewing Process. This poncho sewing process was relatively easy and straightforward. I decided to omit the sleeves portion as it would have been too bulky to sew with the weight of the fabric. I made tassels using knitting yarns and attached it to the hem of the poncho. Since I had extra fabric left after cutting the poncho, I used the rest to cut a long chunky scarf. The Styling. For th