Skip to main content

Summer of T-Shirts Event: Color-blocked Shirt

This week's post is from Julie Marlow, a Palmer/Pletsch Certified Sewing Instructor, will be showing us how to make a color-blocked t-shirt. 

A little background about Julie Marlow:
Julie Marlow has been teaching at Charlotte Sewing Studio for about six years. She has line-up of garment sewing classes including a perfect t-shirt class, pants fitting and the t-shirt of the month. Some of the other classes have evolved to include the creative use of embroidery in apparel as well. Theresa Bahadoor is the owner of the sewing studio, which is a 10,000 square foot facility stocking garment and quilting fabric. They also carry four lines of sewing machines and all the accessories for Singer, Viking, Pfaff and Bernina as well as an array of notions.


My inspiration for this colorblocked t-shirt comes from playing with shapes and fabric making it pleasing to the figure. I hope you will enjoy making this t-shirt by adding your own personality into it. 


The pattern used for this project is Pamela's Patterns The Perfect T-Shirt. The fabrics used in this example are ITY knits, but any jersey knit can be used. Ponte knits can also be used, but the mixing of knit weights (ponte and jersey in the same time) is not suggested. Try to keep with similar weights when choosing the fabrics for this project.


Planning stage
1) Draw the full front of your t-shirt pattern (left and right side front) two times. One of them will be used for drawing out your design and the other will be used in the end to square up the front of the shirt. 

2) Divide up the spaces in a pleasing way. If you choose to divide it in a way other than what is shown below, keep in mind where certain seams hit you. You may not want a horizontal seam going right across your bust (especially if you're busty!) 

3) Mark your pattern as shown, numbering each piece. 


4) Cut out each piece and add 3/8" to your divided areas on both sides. (This is your seam allowance.) Use scraps of paper to add the 3/8" or remember to leave extra space when you are cutting the pieces from fabric. 

There is no need to add extra seam allowance on to the side seams, hem, shoulder or armholes since the seam allowance is already built into the pattern. But if you add it, it's no problem, you will square it up later. 


Layout and cutting 
1) Lay out your fabric in a pleasing way to give the look you want. 

2) Cut out your pieces.  You may want to extend your pieces a little bigger to the outside so you have room to re-adjust your front piece. 

3) Cut the neckband out of one of your fabrics to contrast your main body.  (2.5” by 30”) 

4) One sleeve will be part of the main body, one sleeve you will match the side piece that is closest to your sleeve.

Sewing
1) Add stay tape under the horizontal areas to keep the knit from stretching as you sew.  We recommend SewKeysE 1/2" Knit Stay Tape.

2) Starting with #1, seam together all of your pieces.

3) Lay your second traced front pattern down and recut out the front, squaring up the pattern so that it's easier to sew to the back and sleeves.

4) Reinforce your back shoulder seam with the 1/2" knit stay tape. 

5) While you are at the iron, add 1/2" stay tape all the way around the wrong side of the neck edge. Sew the neckline on to the shirt per pattern directions.

6) Sew in your sleeves per the pattern directions.

7) Sew your side seams and try on for fit. Adjust as necessary.

8) Hem the bottom and sleeves with 1” Double-sided Fusible Stay Tape.

And you're finished! 

Here is one of my student's finished colorblocked shirt. It turned out great!



Thanks again to Julie for putting together this tutorial! If you are ever in the Sarasota/Ft.Myers area of Florida, Do check out Charlotte Sewing Studio and the classes they have to offer. It's a beautiful store!

Next week Tereza from Sewing for Me will be showing us how to change a basic t-shirt pattern into a raglan sleeve shirt. 

Every Monday throughout the summer, we will share with you a pattern hack on a t-shirt pattern.

Don't forget you can sew along with us at home. Share you t-shirt pattern hacks (new ideas you have and ideas that we have shared with you) on Facebook and Instagram using #FMSummerofTshirts. At the end of the summer, we will compile all the people that used the hashtag and you will be entered into a random drawing for $75 gift certificate to Fabric Mart!


Write your comments, I'd love to hear what you think of this. Do you have a favorite t-shirt pattern that was not mentioned? Share it with us!

Comments

  1. I like this idea, but the numbering/sewing order is incorrect. #2 should be #1, #3 should be #2, #4=#3, #5=#4. #6 should be #5 and #1 should be #6.

    ReplyDelete
    Replies
    1. The numbering shown in the photos is correct. You start with #1, the shoulder, then sew that to #2 (just below that) and so on. Does that make sense?

      Delete
  2. This comment has been removed by a blog administrator.

    ReplyDelete
  3. Love the idea. I'm an hour and half (one way) from my favorite store (Charlotte Sewing) so I don't get to take as many classes as I would like. Thanks for coming up with this idea. Hope it brings in a lot more business. Love the expanded classroom.


    ReplyDelete
  4. Love the t-shirt and Pat is a perfect model! I'm going to have to come in, purchase the pattern and some t-shirt fabric! Thanks for the inspiration.

    ReplyDelete
  5. I love this T-Short! The fabrics are beautifully coordinated and I'm going to make one for myself! Thank you for sharing!

    ReplyDelete
  6. Wow, this is just so very stylish and cute! Thanks for sharing your method! It makes for a stunning Tee!

    ReplyDelete
  7. Wow, this is just so very stylish and cute! Thanks for sharing your method! It makes for a stunning Tee!

    ReplyDelete

Post a Comment

Thanks for leaving a comment! All comments are reviewed before posting to help us eliminate spam. Your comment will be posted within 24 hours.

Popular Posts You Might Like

Made by a Fabricista: A Wardrobe Staple for Spring - A Denim Coat

Hello Sewing Friends! It’s Sharon with Sharon Sews with my latest Fabricista make – a denim coat  for spring.  Denim is a wardrobe staple for many of us, and even more so this year with denim on denim looks coming back in style.  The denim I used is a medium weight cotton/lycra blend with about a 20% stretch selvage to selvage.  Fabric Mart always does an amazing job photographing and describing their fabrics, yet I still gasped in delight when I opened the package containing my denim.  It was even better than I had anticipated. This fabric would have worked well for a traditional denim jacket – one with button front closure, chest pockets with flaps, and a collar.   However, I have wanted to sew this open front coat with kimono inspired sleeves and big patch pockets since February 2021.  I saw it in that month’s  BurdaStyle Magazine, bookmarked the page, and promptly forgot about the coat.  It’s coat #105 if you’re interested in sewing one for yourself. Fortunately, I went on an organ

Made by a Fabricista: Revving up your style in the Dana Marie Moto Jacket

Hey friends - I am so excited to have been invited to participate as a Fabric Mart Fabricista this month!  This year is the year I challenge my sewing skills.   I have wanted a moto jacket for some time.  Not just any moto jacket but one that has a classic and timeless style. I saw the Dana Marie Moto Jacket pattern on the Fabric Mart website and knew that was the one.  The fabric I used was a beautiful porcelain white/black/silver 100% polyester plaid weave boucle suiting.    Remember when I said I wanted to challenge my sewing skills?  😉 This fabric was beautiful but fragile to work with.  It was a great mental challenge that had me problem solving before sewing to avoid any potential problems.  I first traced out the pattern onto tissue paper to determine the fit.   I used scrap cotton fabric to sew up a “practice run” of the jacket.    I was pleasantly surprised at how easily the jacket comes together.   I sewed up the muslin in one evening.  It was time to cut into the beautifu

Made By A Fabricista: My Version of the Infamous DVF Wrap Dress

Just in case you are not aware, the iconic Diane Fustenberg wrap dress has turned 50 this year.  In celebration, Vogue has re-released the DVF Wrap Dress pattern, which now comes in extended sizes.  This dress is so classic and fits many different body types.  I got a hold of this pattern and decided this would be my birthday dress this year. This pattern is categorized as a Very Easy Vogue pattern, and I would have to agree with that. Wrap dresses are usually relatively simple to put together since there aren’t that many pattern pieces to sew together. I made View A in a size 22 and the only modification I made was to shorten the hem by 6 inches.  I will say that since I used a Ponte Knit , I could have gone down to a size 20.  I didn’t read the fabric suggestions before picking my fabric.  I’ve always remembered seeing the DVF Wrap dress in knits. After reviewing the fabric suggestions, they do say that you can use soft fabrics, like a Challis or a Chambray. As I mentioned, I’ve alwa